SRAM Blip Grip
SRAM

SRAM Blip Grip

$25.00
In Stock

BlipGrips provide a secure, low-profile mount for SRAM RED eTap Blips on aero bar extensions. Slip-on design fastened with a 2.5 mm screw for a tidy, race-ready cockpit.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

SRAM Blip Grip Aero (Mfr. Part #00.3018.097.000, Product #230788) is engineered exclusively to mount RED eTap Blips to aero bar extensions. The BlipGrip slides over the end of most aero extensions and locks in place with a 2.5 mm screw, creating a secure satellite switch position for clean, thumb-activated shifting without routing extra wires. Built for time-trial and triathlon cockpits, the unit uses a high-strength reinforced polymer shell to keep weight down while resisting flex and road vibration. The slim, contoured profile keeps the Blip low to the extension for aerodynamic benefit and a natural reach to your fingertips during aggressive riding positions.

Key Features

Simple, secure attachment: The BlipGrip slides over aero extensions and is fastened with a 2.5 mm screw for tool-assisted security. Once mounted, the Blip stays locked in position even under hard sprints or rough roads. Durable materials & precise fit: Injection-molded reinforced polymer construction resists impact and UV exposure while keeping mass minimal. The screw and internal hardware are corrosion-resistant to handle wet-weather training and open-water triathlons.

Fit & Compatibility

The BlipGrip is designed specifically for aero bar extensions and for use with SRAM RED eTap Blips (satellite switches). It fits over rounded aero extension ends—measure your extension diameter and profile to confirm a snug fit before purchase. Because the product is made for aero extensions, it is not intended for flat or irregular non-aero bar ends. If you run aftermarket extensions, check that the tip is tapered or rounded enough for the BlipGrip sleeve to slide on. The included 2.5 mm screw secures the mount; most setups will require only a 2.5 mm hex key for installation and minor positioning adjustments.

Who It's For

Ideal for time-trialists, triathletes, and road racers using SRAM RED eTap wireless shifting who want clean, aerodynamic brake/shift cockpit setups. Riders who value precise satellite switch placement—without bulky clamps or zip-tied solutions—will appreciate the tidy integration BlipGrips provide. Also useful for coaches and bike fitters who need repeatable satellite switch positions across different extensions, and for racers converting to wireless shifting who want to retain quick, on-extension shift access.

Key Features

  • ✓ Secure slip-on mount designed specifically for aero bar extensions
  • ✓ Low-profile, aerodynamic shape keeps switches close to your hand
  • ✓ Fastened with a corrosion-resistant 2.5 mm screw for reliable hold
  • ✓ High-strength reinforced polymer shell for low weight and durability
  • ✓ Engineered exclusively to house SRAM RED eTap Blips (satellite switches)
  • ✓ Easy installation with a single 2.5 mm hex key—no clamps or tapes

Specifications

Misc for Blips

Product Identifiers

Vendor Item # 00.3018.097.000
UPC 710845779848

Frequently Asked Questions

Will the Blip Grip fit my aero extension?

BlipGrips are designed for rounded aero extension tips—measure the end of your extension to ensure a sleeve fit. Very large-diameter or square/flattened tips may not accept the slip-on design. If in doubt, compare the contour of your extension to typical TT/tri bars or consult Forest Bikes customer service with your bar model.

What tools do I need to install the BlipGrip?

Installation requires a 2.5 mm hex key to tighten the securing screw. Slide the BlipGrip onto the extension, position the RED eTap Blip inside, then tighten the 2.5 mm screw until firm. Avoid over-torquing—snug is sufficient to prevent movement.

Are BlipGrips compatible with non-SRAM Blips or switches?

BlipGrips are engineered specifically for SRAM RED eTap Blips. While some aftermarket satellite switches of similar size may fit, compatibility is not guaranteed. For reliable performance, pair BlipGrips with official SRAM eTap satellite switches.

Can I use the BlipGrip in wet or salty conditions?

Yes. The reinforced polymer body resists moisture, and the screw hardware is corrosion-resistant. After saltwater exposure (beach training or coastal races), rinse and dry components to extend service life.

Does the BlipGrip affect aerodynamics or comfort?

The BlipGrip's slim, contoured profile is designed to minimize aerodynamic penalty and keeps the switch low to the extension for natural thumb reach. Proper placement can improve cockpit ergonomics and reduce hand movement during high-speed efforts.

Can I reposition the BlipGrip after installation?

Yes. Loosen the 2.5 mm screw, slide the BlipGrip to the desired position, then retighten. We recommend small adjustments during a fit session to find the most comfortable and accessible placement before fully tightening.

Buying Guide

When buying aero-mounted switch mounts like the SRAM BlipGrip, prioritize fit and ergonomics first: confirm your aero extension tip shape and diameter, and decide where the switch will sit relative to your hand position in full aero. Materials matter—reinforced polymer bodies keep weight down and resist chafing while durable screw hardware prevents loosening under vibration. Consider whether you want a removable solution (easy to move between bikes) or a permanent mount; BlipGrips offer a semi-permanent slip-on design that’s lightweight and low-profile. Always test placement during a fit session so the switch is reachable without compromising control or comfort.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product