SRAM Cable Anchor Bolt/Washer
SRAM

SRAM Cable Anchor Bolt/Washer

$14.40
In Stock

OEM SRAM cable anchor bolt and washer for X0 Type 2/X0 10-speed rear derailleurs. Hardened steel with corrosion-resistant finish for secure cable clamping and reliable shifting.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

SRAM Cable Anchor Bolt/Washer (Part #11.7515.026.000) is the OEM replacement clamp used on X0 Type 2 and X0 10-speed rear derailleurs. This single-piece bolt and mating washer restore the cable clamp interface to factory specification for consistent cable bite and repeatable shifting performance. Manufactured from hardened steel with a corrosion-resistant surface finish, the anchor bolt resists deformation under clamp load and stands up to the wet and dirty conditions typical of mountain biking. The washer helps distribute clamp force and protects the derailleur body from stray wear, keeping cable routing tight and secure even under heavy use.

Key Features

Precision OEM fit: Designed to the original SRAM specification for X0 Type 2/X0 10-speed derailleurs to ensure correct alignment and clamp pressure. Durable construction and function: Hardened steel construction and corrosion-resistant finish provide long life and dependable cable retention. The included washer reduces localized stress and helps prevent thread damage to the derailleur mounting area. • OEM part number 11.7515.026.000 — factory replacement • Hardened steel bolt with corrosion-resistant coating • Includes mating washer to protect derailleur body • Sold individually — replace a single damaged or missing unit

Fit & Compatibility

This anchor bolt and washer are specifically made for SRAM X0 Type 2 and X0 10-speed rear derailleurs. It restores the original cable clamp geometry and is the correct spec for the 10-speed cable anchor on these models. While the bolt may physically fit some other SRAM 10-speed derailleurs, compatibility is limited to SRAM 10-speed designs that use the same anchor geometry. It is not guaranteed to be compatible with 11-speed SRAM derailleurs, SRAM Rival/Force road derailleurs, or non-SRAM brands. Check your derailleur model and the factory part number (11.7515.026.000) before ordering.

Who It's For

This part is aimed at mountain bikers, mechanics, and workshop techs who need a precise OEM replacement for a lost, damaged, or corroded cable anchor bolt on SRAM X0 Type 2/X0 10-speed rear derailleurs. It's ideal for riders rebuilding an older drivetrain or repairing crash-damaged hardware. If you maintain your own bike or run a shop, keeping a few of these on hand avoids long delays in returning a customer's bike to service. Riders upgrading cables or housings will also appreciate a fresh bolt and washer to ensure secure clamping and consistent shifting.

Key Features

  • ✓ OEM SRAM part number 11.7515.026.000 for X0 Type 2/X0 10-speed derailleurs
  • ✓ Hardened steel bolt with corrosion-resistant surface finish
  • ✓ Includes mating washer to distribute clamp force and protect derailleur body
  • ✓ Restores factory cable clamp geometry for repeatable shifting
  • ✓ Sold individually — perfect for repair or crash replacement
  • ✓ Compact, lightweight replacement: 0.03 lb shipping weight

Product Identifiers

Vendor Item # 11.7515.026.000
UPC 710845604195

Frequently Asked Questions

Will this bolt fit any SRAM derailleur?

This anchor bolt is specified for SRAM X0 Type 2 and X0 10-speed rear derailleurs. It may fit other SRAM 10-speed designs with the same anchor geometry, but it is not guaranteed for 11-speed SRAM or non-SRAM derailleurs. Always verify compatibility with the derailleur model or the OEM part number 11.7515.026.000.

Does the washer come included?

Yes — the product includes the matching washer used with the anchor bolt. The washer helps distribute clamp force and protects the derailleur body from wear during cable clamping.

How do I install the cable anchor bolt?

Thread the cable into the clamp slot, position the washer, then install and hand-tighten the anchor bolt to seat the cable. Pull the cable to the desired tension and torque the bolt to factory spec. If you don't have the exact torque value on hand, snug the bolt firmly without over-tightening to avoid stripping the threads—use a torque wrench if possible.

Can I reuse a stripped or rounded bolt?

If the bolt head or threads are rounded, stripped, or corroded, replace it. Reusing damaged hardware can lead to poor cable retention or further damage to the derailleur body threads. This OEM replacement restores the original clamping action safely.

Is there a recommended lubricant or anti-seize for the threads?

A light dab of anti-seize or grease on the threads can help prevent seizure, especially in wet or coastal environments. Avoid excess lubrication that could migrate to the cable clamping surface; keep the clamping faces clean and dry for the best cable bite.

How many come in a pack?

This listing is for a single cable anchor bolt and washer (Qty 1). Purchase multiple units if you need spares or are servicing several bikes.

Buying Guide

When buying a derailleur cable anchor bolt, prioritize OEM parts that match your derailleur model — correct dimensions, thread pitch, and clamp geometry are critical for secure cable retention and reliable shifting. Look for hardened materials and corrosion-resistant finishes when you ride in wet or salty conditions. Decide whether you need a single replacement or a small spare pack for workshop maintenance. If your derailleur threads show damage, buy a replacement bolt and consider professional inspection of the derailleur body to ensure there is no need for a larger repair.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product