SRAM Press Tool 23327
SRAM

SRAM Press Tool 23327

$15.00
In Stock

OEM SRAM press tool (23327 / TL-HBT-A1) designed for 23x32x7 front hub bearings. Precision-machined, compact and purpose-built for servicing Roam, Rise, Rail and X0 hubs.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

SRAM Press Tool 23327 (TL-HBT-A1) is a purpose-built bearing press driver engineered to install 23x32x7mm front hub bearings without marring the hub shell or bearing race. The tool centers the bearing perfectly and delivers even radial force so bearings seat squarely — a must for long-lasting, smooth hubs. The tool is precision-machined to tight tolerances to match OEM bearing dimensions and hub interfaces found on SRAM X0, 900, Rise, Roam and Rail front hubs. A corrosion-resistant finish and robust construction give the tool the durability needed for repeated shop or trail-side servicing.

Key Features & Construction

Designed for durability: the Press Tool 23327 uses a hardened, precision-machined driver profile and a low‑profile contact face sized to 23x32x7mm bearings to avoid edge loading. The compact one-piece design minimizes eccentric forces during installation and reduces the risk of bearing or hub damage. Real-world benefits include consistent bearing seating, faster service times, and repeatable results whether you’re working in a home garage or a pro shop. Lightweight and compact, it fits easily in a mechanic’s kit or toolbox — shipping dims 4" x 3.5" x 0.7", weight 0.1 lb.

Fit & Compatibility

This press driver is specifically sized for 23x32x7mm front hub bearings and is the OEM solution for SRAM front hub models including X0 hubs, 900 hubs, Rise 60 (B1), Roam 30/40/60 (B1) and Rail 40. SRAM model ID TL-HBT-A1 and manufacturer part # 00.1918.177.010 correspond to part number 23327. It works with common bearing presses, arbor presses, and most large-bolt bench presses when paired with the correct receiving fixture. While optimized for SRAM hubs listed above, verify your hub’s bearing dimensions before use — do not use for bearings with different outer diameters or widths to avoid damage.

Who This Tool Is For

This tool is aimed at mountain bike mechanics, home wrenchers, and shop technicians who maintain SRAM-equipped bikes. If you service Roam, Rise, Rail or X0 front hubs regularly, this OEM driver ensures correct bearing alignment and extends hub service life. Casual riders who rarely service hubs may prefer a full press kit or to have a shop perform the service, but for owners who want precise, repeatable in-house servicing, the SRAM Press Tool 23327 is an efficient, affordable, and compact investment.

Key Features

  • ✓ Precision driver sized for 23 x 32 x 7 mm front hub bearings
  • ✓ OEM SRAM TL-HBT-A1 tool for Roam, Rise, Rail and X0 hubs
  • ✓ Precision-machined steel driver with corrosion-resistant finish
  • ✓ Low-profile one-piece design prevents bearing edge loading
  • ✓ Compact and lightweight for shop or trail-side carry
  • ✓ Works with arbor presses and compatible bench press fixtures

Product Identifiers

Vendor Item # 00.1918.177.010
UPC 710845750168

Frequently Asked Questions

What exactly does this tool press?

The SRAM Press Tool 23327 is a driver sized to press 23x32x7 mm front hub bearings into SRAM hub shells. It contacts the bearing’s outer race to apply even force and prevent damage.

Which hub models are compatible with this tool?

This OEM tool fits front hubs including SRAM X0, 900 series, Rise 60 (B1), Roam 30/40/60 (B1), Rail 40 and Rise XX where the bearing spec is 23x32x7 mm. Always double-check your hub’s bearing dimensions before use.

Can I use this tool with a hydraulic press or bench press?

Yes. The driver works with arbor presses, bench presses, or manual presses that provide controlled axial force. Use a proper receiving cup or fixture to support the hub shell and prevent deformation.

Will this tool damage bearings or hubs?

When used correctly — contacting the bearing outer race and supporting the hub shell — this tool minimizes risk of damage by promoting even seating. Avoid using it on bearings with different outer diameters or without proper support.

Is this tool suitable for shop use and repeated installs?

Yes. Built for repeated service cycles, the precision-machined construction and corrosion-resistant finish stand up to regular shop use. Inspect the tool for wear before high-volume work.

Do I need any other tools to press bearings with this driver?

You’ll need a compatible press (arbor or bench press) and an appropriate receiving fixture or cup to catch the hub shell. Bearing grease, cleaning supplies, and possibly a bearing removal tool are also recommended.

Buying Guide

When choosing a bearing press tool, match the tool to the bearing outer diameter and width — in this case 23x32x7mm — and confirm hub model compatibility. OEM drivers like SRAM’s TL-HBT-A1 guarantee the correct contact profile and minimize the risk of edge loading or misalignment. Consider the press environment: if you work in a shop, make sure you have a compatible arbor or bench press and receiving fixtures. For occasional use, a compact OEM driver plus a simple press and receiving cup is a cost-effective solution compared with full multi-size kits.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product