Cane Creek 40 Series Crown Race
40 Series Crown Race
40 Series Crown Race
Cane Creek

Cane Creek 40 Series Crown Race

In Stock

Precision steel crown race from Cane Creek’s 40 Series — engineered for secure bearing seating and long wear on 1-1/8" steerers. Ideal replacement or upgrade for road and commuter headsets.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Available Options

Option Price Availability
Cane Creek, Cane Creek, Crown Race Is2, Is6, S6, S2, Tank Jump, 1 1/8'' — In Stock
Cane Creek, 40 Crown Race 1-1/8" 52/30 Steel — In Stock
Cane Creek, 40 Crown Race 1.5" 52/40 Steel — In Stock

Product Details

Overview & Technology

The Cane Creek 40 Series Crown Race is a precision-machined steel part designed to give your headset a reliable, long-lasting bearing interface. Built for 1-1/8" steerers (listed as 41/30 in Cane Creek sizing), this crown race delivers a durable contact surface that resists fatigue and keeps your headset tracking smooth under load. Manufacturing and finish: the crown race is CNC-turned from hardened steel and finished with a corrosion-resistant surface treatment to withstand wet, gritty conditions. Its chamfered leading edge and tightly controlled OD/ID tolerances ensure repeatable seating on the fork crown and predictable preload behavior for the bearings.

Key Features & Construction

Built for longevity: the steel construction offers superior wear resistance compared with softer alloys, reducing the risk of deformation at the bearing interface. The crown race is shaped to match Cane Creek 40-series geometry, providing full ring contact and preventing uneven bearing wear. Practical design features include a chamfered installation lip to ease pressing onto the crown, a flush top profile for clean headset stack height, and minimal mass — shipping weight is just 0.01 lb. These details add up to a small part that has a big impact on steering feel and headset lifespan.

Fit, Sizes & Compatibility

This crown race is specified for 1-1/8" steerers with a Cane Creek 40-series seat dimension (marked as 41/30). Variants are available to match other Cane Creek interfaces (IS2, IS6, S2, S6, Tank Jump) and larger 1.5" crowns (52/40) so you can pick the right part for your fork and headset model. Compatible headsets and forks include Cane Creek 40 series headsets and any headset/fork crown with the same seat profile. Always confirm your fork crown diameter and headset spec before ordering — if in doubt, check the fork manual or contact Forest Bikes with your fork and headset model numbers for fit verification.

Who This Crown Race Is For

If you ride road, commuter or light-gravel bikes with a 1-1/8" steerer and a Cane Creek 40-series or similar headset, this crown race is a straightforward, high-value replacement. It's aimed at riders who want a durable, serviceable component that preserves bearing life and keeps steering crisp. Mechanics, home-wrenchers and workshop techs will appreciate the predictable fit and straightforward installation. It’s also a smart spare to keep in your shop kit if you service multiple Cane Creek headsets or vintage/1-1/8" steerer forks.

Key Features

  • ✓ Hardened steel construction for high wear resistance and longevity
  • ✓ Precision CNC-machined seat to Cane Creek 40 series tolerances
  • ✓ Designed for 1-1/8" steerer forks (41/30 seat profile)
  • ✓ Chamfered leading edge for easier, damage-free installation
  • ✓ Minimal stack height and flush top profile for clean headset preload
  • ✓ Available variants for IS2/IS6/S2/S6/Tank Jump and 1.5" sizes

Specifications

Misc Steel 41/30 1-1/8"

Product Identifiers

Vendor Item # BAA0008S
UPC 840226076652

Frequently Asked Questions

What size steerer does this crown race fit?

This Cane Creek 40 Series crown race is listed for 1-1/8" steerers with a 41/30 seat profile. Check your fork crown diameter or headset spec to confirm compatibility before ordering.

Can I reuse my old crown race or should I replace it?

If the old crown race shows burrs, deformation or heavy corrosion you should replace it. A worn crown race can accelerate bearing wear and cause poor headset preload and steering play.

How do I install the crown race?

Press the crown race squarely onto the fork crown using a crown race setting tool or a carefully used mallet and block. Ensure it sits flush on the crown seat and use even force to avoid cocking or damage.

Is steel necessary — why not aluminum or alloy?

Steel offers higher hardness and wear resistance than common headset alloys. That longevity helps maintain bearing life and reduces the chance of the race deforming under load — useful for riders who want a durable interface.

Which Cane Creek headsets is this compatible with?

This crown race is intended for Cane Creek 40 Series headsets and any headset/fork that uses the same 41/30 1-1/8" seat profile. Other Cane Creek interfaces (IS2, IS6, S2, S6, Tank Jump) have variant crown races—match the exact model when replacing parts.

Buying Guide

When buying a crown race, the critical factors are seat profile, steerer diameter and headset family. Match the crown race seat dimensions (for example 41/30 for 1-1/8") to your fork crown and confirm compatibility with the headset model. Picking a steel race like this Cane Creek 40 Series part gives better wear resistance than softer alloys, which matters if you ride frequently or in wet/gritty conditions. Also consider whether you need a specific Cane Creek interface (IS2/IS6/S2/S6) or a different steerer size (1.5"/52mm). Keep a spare crown race in your shop kit if you service multiple bikes — replacing a damaged race is cheaper and easier than replacing a bearing or fork crown.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product