FSA BB30
FSA

FSA BB30

In Stock

High-performance FSA BB30 press-fit bottom bracket for PF road frames (68/73mm). Available with sealed ceramic or steel bearings for 30mm crank spindles—low friction and durable.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & technology

FSA's BB30 / PF30 press-fit solution is engineered for modern road frames with 68mm or 73mm press-fit shells. The assembly uses precision sealed cartridge bearings and 30mm spindle compatibility to deliver a smooth, efficient power transfer under road loads. You can choose between the BB-OS8200 ceramic-bearing option and the BB-OS6000 steel-bearing variant depending on your priorities. The unit features lightweight anodized aluminum cups with interference-fit bores and high-quality sealed bearings. Ceramic-bearing versions reduce rotational friction and can shave watts at sustained efforts, while steel-bearing versions offer proven durability and a more cost-effective service life.

Key features & benefits

Materials and construction: anodized aluminum press-fit cups house sealed cartridge bearings (ceramic or steel). The sealed design keeps grit and moisture out for longer bearing life and consistent rolling feel. • 30mm crank spindle interface — built for BB30/PF30 cranksets and many modern 30mm spindle road cranks. • Shell compatibility — optimized for PF road shells 68/73mm. • Low weight — compact press-fit design that keeps rotating mass down.

Fit, installation & compatibility

Compatibility: Designed for BB30 / PF30 press-fit road shells 68mm or 73mm wide and cranks with a 30mm spindle. This is not compatible with Shimano Hollowtech II (24mm) or older square-taper spindles without an adapter. Installation notes: press-fit bottom brackets require a BB press tool and, ideally, a facing tool if shell tolerance is in question. Use the correct interference fit technique—light Loctite where specified by your frame or install with marine grease in non-hardened shells. If you run non-30mm cranks, look for separate adapters (sold separately).

Who this is for

This BB30 press-fit unit is aimed at road riders and racers running 30mm spindle cranksets on press-fit frames. Choose the ceramic BB-OS8200 if you want lower friction and a slightly crisper pedaling feel for time trials, long road rides, or competitive events. If you want a robust, lower-cost option for everyday training and long-term durability, the steel-bearing BB-OS6000 variant delivers reliable service and easier replacement intervals. Both options appeal to riders who prioritize low drivetrain drag and reliable sealed-bearing performance.

Key Features

  • ✓ Fits PF30/BB30 road shells 68mm and 73mm
  • ✓ Designed for 30mm crank spindles—direct compatibility
  • ✓ Choice of sealed ceramic (BB-OS8200) or steel bearings
  • ✓ Anodized aluminum press-fit cups for light weight and durability
  • ✓ Sealed cartridge bearings resist grit and moisture
  • ✓ Low rotational friction improves sustained power efficiency
  • ✓ Compact press-fit design keeps overall bike weight down

Specifications

BB Shell Type BB30
BB Shell Width 68/73mm
BB Bearing Steel
Crank Spindle Diameter 30mm
Interface BB30

Product Identifiers

Vendor Item # 200-3002
UPC 400310058188

Frequently Asked Questions

Is this bottom bracket compatible with my crank?

This BB30 unit is compatible with cranks that have a 30mm spindle (BB30/PF30 standard). It is not directly compatible with 24mm Shimano Hollowtech II or square-taper spindles without an adapter. Check your crank's spindle diameter before purchasing.

What's the difference between the ceramic and steel-bearing variants?

Ceramic bearings (BB-OS8200) reduce rolling resistance and can offer slightly better longevity under ideal conditions, making them good for racers and time-trialists. Steel bearings (BB-OS6000) are more cost-effective and forgiving in contaminated or heavy-use environments.

Do I need special tools to install it?

Yes — press-fit bottom brackets require a bearing press tool to install properly. If your shell alignment or tolerance is uncertain, a facing tool is recommended. Incorrect installation can cause creaks and premature bearing wear.

How often should I service the bearings?

Sealed cartridge bearings are low maintenance but not maintenance-free. Expect multi-thousand-kilometer life under normal road use; service intervals depend on conditions. Replace bearings at the first sign of roughness, play, or water ingress.

Will this eliminate creaks on my press-fit frame?

A high-quality press-fit bottom bracket reduces one potential source of creaks, but creaks can also come from crank bolts, chainset interface, or poor shell preparation. Proper installation, correct fitment, and using anti-creak compound where appropriate will give the best result.

Can I convert to a 24mm spindle crank?

You can use aftermarket adapters to run 24mm spindles in PF30/BB30 shells, but adapters are sold separately. Adapters add interfaces that can change chainline and may require specific spacer setups—choose a reputable adapter and follow manufacturer instructions.

Buying Guide

When choosing a PF30/BB30 bottom bracket for road use decide first on bearing type: ceramic for lower friction and slightly improved performance, steel for cost-effectiveness and ruggedness. Verify your crank's spindle diameter is 30mm and that your frame shell is PF30/BB30 68mm or 73mm. Consider the tools and serviceability: press-fit units need a proper press and possibly shell facing to ensure long-term silence and bearing life. If you plan to use a different spindle size, budget for a quality adapter and check chainline implications.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product