RockShox Shock Hardware 10X20.0

$15.00

In Stock

OEM RockShox rear shock mounting hardware (10x20.0) — a precision 3-piece replacement kit for RS-SPP-A0 shocks. Durable, corrosion-resistant construction for reliable suspension performance.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 10X20.0 is a purpose-built 3-piece rear shock mounting kit designed to restore factory alignment and smooth articulation on compatible RockShox rear shocks. The compact kit is specified as 10x20.0 (inner diameter x outer diameter in mm) and is identified by SRAM Model ID RS-SPP-A0 and RockShox part number 11.4118.091.005. Manufactured to OEM tolerances, these pieces are CNC-formed from high-grade corrosion-resistant metal and finished to resist galling in wet, muddy, and high-cycle conditions. That precision fit reduces lateral play, improves bushing life, and restores predictable suspension kinematics — essential for enduro and aggressive trail riding where consistent shock function matters.

Key Features & Benefits

What you get in the kit: • Three precision-machined components — typically two outer collars and one internal sleeve to center the shock eyelet. • Exact-match sizing (10x20.0 mm) for a direct OEM swap on compatible RockShox rear shocks. • Durable, corrosion-resistant finish for long service life in all-weather conditions. These hardware pieces restore proper bearing alignment and eliminate side-to-side slop that can cause noise, premature wear, and inconsistent damping. Lightweight yet robust, the kit keeps your rear suspension performing as intended without the need for full shock replacement.

Fit, Compatibility & Installation

This 10x20.0 kit is intended for RockShox rear shocks that accept 10 mm inner diameter hardware with a 20 mm outside envelope. Refer to SRAM Model ID RS-SPP-A0 and RockShox part number 11.4118.091.005 to confirm fit. It is commonly used with a 1/2" mounting bolt configuration. Installation is straightforward for mechanically competent riders or a suspension tech: press the collars/sleeve into the shock eyelet, verify smooth articulation and correct seating, then torque the mounting bolt to the bike manufacturer’s spec. Always inspect seals and bearings during service — replace worn seals or bushings as needed to protect the new hardware.

Who This Is For

This part is ideal for enduro and aggressive trail riders who need a reliable OEM replacement to fix play, noise, or misalignment at the shock eyelets. It's also useful for home mechanics and shops performing routine shock service or rebuilds who want an exact-fit RockShox replacement. If your rear shock shows lateral movement at the eyelet, you hear knocking on rough trails, or the shock has been disassembled for service, this 3-piece kit is a cost-effective way to restore factory performance without replacing the entire shock assembly.

Key Features

✓ OEM RockShox 3-piece rear shock mounting hardware kit
✓ Precision 10x20.0 mm sizing for exact fit to RS-SPP-A0 shocks
✓ CNC-formed, corrosion-resistant metal for long-term durability
✓ Restores alignment to reduce play, noise, and premature wear
✓ Compact, lightweight design for minimal added weight
✓ Direct replacement using standard 1/2" mounting bolt setups
✓ Quick install for techs or experienced home mechanics

Product Identifiers

Vendor Item #	11.4118.091.005
UPC	710845868634

Frequently Asked Questions

What exactly is included in the 3-piece kit?

The kit contains three precision-machined metal components — typically two outer collars and one internal sleeve — sized 10x20.0 mm to center the shock eyelet. These parts are intended to be installed as the shock’s mounting hardware to eliminate play and restore alignment.

Will this fit my RockShox rear shock?

This part is designed for RockShox rear shocks that use 10 mm inner-diameter mounting hardware, identified by SRAM Model ID RS-SPP-A0 and part number 11.4118.091.005. Check your shock’s service manual or measure the eyelet ID/OD to confirm compatibility.

Can I install this myself or should a shop do it?

Experienced home mechanics can install the hardware with basic tools and a press or arbor setup, but correct seating and torque are critical. If you’re unsure, have a suspension tech install and verify the fit to avoid damage and ensure proper function.

How do I know when shock hardware needs replacing?

Replace shock hardware if you notice lateral play at the eyelet, audible knocking under compression, uneven wear on bushings, or visible corrosion. Regular service intervals and inspection during shock servicing will reveal when hardware should be replaced.

Is this kit compatible with non-RockShox shocks?

It may fit other shocks that accept the same 10x20.0 sizing, but compatibility varies by manufacturer. Always verify dimensions and tolerances against the shock’s specifications before purchasing for non-OEM applications.

Do these pieces include seals or bushings?

This listing covers only the metal mounting hardware components. Seals and internal shock bushings are sold separately — inspect those parts during service and replace them as needed to protect the new hardware.

Buying Guide

When buying shock mounting hardware, confirm the exact eyelet dimensions (inner and outer diameter), the bolt clearance, and the shock model ID. OEM part numbers like RockShox 11.4118.091.005 and SRAM RS-SPP-A0 ensure an exact-fit replacement; if you’re uncertain, remove the shock and measure the eyelet or consult the manufacturer’s service manual. Also consider servicing the surrounding seals and bushings at the same time. Replacing hardware alone restores alignment, but worn seals or bushings will accelerate wear on new metal parts. For peace of mind, buy a full service kit when doing a suspension teardown.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product