RockShox Shock Hardware 10X25.0
RockShox

RockShox Shock Hardware 10X25.0

$15.00
In Stock

Genuine RockShox 10x25.0 rear shock mounting hardware — a 3-piece 1/2" kit with heat-treated alloy bolt, hardened sleeve and low-friction bushings for reliable rear suspension mounting.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 10x25.0 (Manufacturer PN: 11.4118.091.008, Product #942716) is a precision 3-piece rear shock mounting kit sized 1/2" (10x25.0). This OEM replacement set is identified by SRAM Model ID RS-SPP-A0 and is designed to restore factory alignment and smooth articulation for your rear shock. The kit pairs a heat-treated alloy steel bolt with a hardened tubular sleeve and low-friction polymer bushings. The bolt's corrosion resistant finish and the sleeve's tight tolerances minimize play and wear, while the polymer bushings reduce metal-on-metal contact for quieter, smoother suspension action under load.

Key Features & Benefits

Built for dependable performance. The three-piece design gives a secure bearing surface and repeatable fitment: bolt, sleeve, and bushings work together to keep your shock centered and moving freely through its travel. That matters on technical climbs and rough descents where precise rear suspension kinematics affect traction and pedaling efficiency. • Precision-machined bolt: heat-treated alloy steel for strength and fatigue resistance. • Hardened sleeve: tight tolerance tube provides bearing surface and correct spacing. • Low-friction bushings: polymer material reduces noise and wear. • OEM fit: SRAM Model ID RS-SPP-A0 — direct replacement for compatible RockShox shocks.

Fit, Installation & Compatibility

This part is sized 10x25.0 (1/2" diameter, 25.0mm effective length) and ships as a 3-piece assembly. Verify fit by checking your shock eyelet inner diameter and stack spacing; if your shock calls for a 10x25.0 mounting pin or lists SRAM/ RockShox part numbers that cross to 11.4118.091.008, this kit will fit as a direct OEM replacement. Installation is straightforward: remove the old hardware, clean the shock eyelets, lightly grease the sleeve and bolt per manufacturer recommendations, then torque to your bike maker's spec. Shipping dimensions: 5.25" x 4" x 0.5" and weight 0.1 lb — small, lightweight spare that’s easy to carry in a workshop kit.

Who This Is For

This RockShox 10x25.0 hardware kit is aimed at mountain bikers who own a RockShox rear shock or frame that uses the 10x25.0 mounting standard. It's a must-have for home mechanics, bike shop techs, and trail riders focused on maintaining precise suspension performance. Keep a set on hand if you service multiple bikes, ride in wet or gritty conditions, or want to eliminate play in worn eyelets—installing fresh hardware restores the original mounting geometry and keeps your shock tracking as intended.

Key Features

  • ✓ OEM RockShox 3-piece rear shock mounting kit, 10x25.0 (1/2")
  • ✓ Heat-treated alloy steel bolt for high strength and fatigue resistance
  • ✓ Hardened tubular sleeve provides precise bearing surface and spacing
  • ✓ Low-friction polymer bushings reduce noise and metal wear
  • ✓ Compatible with SRAM Model ID RS-SPP-A0 / PN 11.4118.091.008
  • ✓ Quick, workshop-friendly installation — minimal tools required
  • ✓ Compact shipping size (5.25" x 4" x 0.5") and lightweight (0.1 lb)

Product Identifiers

Vendor Item # 11.4118.091.008
UPC 710845868665

Frequently Asked Questions

Will this fit my RockShox shock?

This kit fits shocks and frames that specify a 10x25.0 (1/2" x 25.0mm) rear shock mount or list SRAM Model ID RS-SPP-A0 / PN 11.4118.091.008. Always confirm the eyelet inner diameter and required pin length in your shock or frame service manual before purchase.

What materials are used in the components?

The assembly uses a heat-treated alloy steel bolt with a corrosion-resistant finish, a hardened steel sleeve for the bearing surface, and low-friction polymer bushings to cut noise and wear. That combination balances strength, longevity, and smooth articulation.

Can I reuse the old bushings or sleeves?

We recommend replacing all three components together. Reusing worn sleeves or bushings can lead to play, premature wear of the new bolt, and degraded suspension feel. A full replacement restores factory tolerances.

Do I need special tools to install this hardware?

Installation typically requires basic workshop tools: appropriate sockets or hex keys for your shock bolt, torque wrench to factory specs, and light grease for the sleeve and bushings. If you’re unsure, have a professional mechanic do the swap.

How often should I replace shock mounting hardware?

Replace hardware if you notice play, creaking, corrosion, or visible wear on the sleeve/bushings. In high-use or wet/gritty conditions, inspect the mounts during annual service and replace proactively if tolerances have opened.

Buying Guide

When buying shock mounting hardware, match the diameter and effective length (here 10x25.0) to your shock and frame specifications. Verify OEM part numbers or SRAM/RockShox model IDs to ensure a direct fit — aftermarket substitutions can change stack height or introduce play. Choose hardware made from hardened materials with low-friction bushings to limit wear and keep suspension movement quiet. Keep a spare kit in your workshop or travel pack if you ride frequently in wet, muddy, or abrasive conditions.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product