RockShox Shock Hardware 10X30.0

$15.00

In Stock

Genuine RockShox 3-piece rear shock mounting hardware (10x30.0) — hardened steel sleeves and shells for precise shock alignment and minimal play.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 10X30.0 (Part #11.4118.091.009) is a factory replacement rear shock mounting kit engineered to restore the factory fit and function of your rear suspension. Listed by SRAM as Model ID RS‑SPP‑A0, this 3-piece assembly is built for a snug, repeatable connection between shock eyelet and frame link. The kit is manufactured from heat‑treated steel with a corrosion‑resistant coating to survive the wet and gritty conditions mountain bikes face. The 10×30.0 designation refers to the bushing/sleeve geometry (10 mm diameter, 30 mm length), and the 1/2" reference describes the common bolt interface used on many RockShox rear shock mounts. Shipping dimensions are compact (5.25" x 4" x 0.5") and the set is lightweight at 0.1 lb, making it easy to carry as a spare or keep in the workshop.

Key Features & Real‑World Benefits

Factory‑spec fit: This genuine RockShox hardware is precision‑machined to OEM tolerances so the shock sits true in the frame, eliminating unwanted side‑to‑side play and ensuring consistent suspension performance. Durable construction: Heat‑treated steel sleeves and shells resist deformation and wear under repeated loading. The corrosion‑resistant finish helps prevent seizure and simplifies future servicing. Riders will notice crisper suspension feel, quieter pivots, and reduced slop when replacing worn or damaged hardware.

Fit, Compatibility & What's Included

This 10X30.0 kit is designed for rear shocks and frames that specify 10 mm x 30 mm bushings with a 1/2" bolt interface — common across many RockShox rear shock applications. Manufacturer Part #: 11.4118.091.009 and Forest Bikes Product #942717 make it easy to confirm you have the correct part for service or spares. Typical 3‑piece assemblies include an inner sleeve and two outer shells (or half bushings). Note: depending on how your OEM listing reads, the mounting bolt/bolt hardware may not be included — verify your order if you also need the bolt, washers, or torque‑spec fastener. When in doubt, check your shock and frame service manual or contact us for help confirming fitment.

Who This Is For

This RockShox Shock Hardware 10X30.0 is aimed at mountain bikers, mechanics, and home‑wrenchers who need a direct OEM replacement for worn or damaged rear shock bushings. It's an essential service part for riders who maintain peak suspension performance and want the exact fit and reliability of factory parts. If you race, ride frequently in muddy or abrasive environments, or are rebuilding a used frame or shock, replacing the mounting hardware is a small investment that prevents accelerated wear to the shock eyelet and keeps suspension kinematics correct.

Key Features

✓ Genuine RockShox OEM replacement — Part #11.4118.091.009
✓ 3-piece assembly engineered for precise 10×30 mm fit
✓ Heat‑treated steel construction with corrosion‑resistant finish
✓ SRAM Model ID RS‑SPP‑A0 compatibility for quick cross‑reference
✓ Restores tight rear shock fit and reduces play/noise
✓ Lightweight, compact shipping dimensions for spares in the field

Product Identifiers

Vendor Item #	11.4118.091.009
UPC	710845868672

Frequently Asked Questions

Is this kit compatible with my RockShox rear shock?

This 10X30.0 kit is compatible with shocks and frames specifying 10 mm x 30 mm bushings and a 1/2" bolt interface. Check your shock or frame service manual for bushing dimensions or match Manufacturer Part #11.4118.091.009 / SRAM Model ID RS‑SPP‑A0 to confirm fitment.

Does the kit include the mounting bolt and washers?

The listing is for the 3‑piece mounting hardware (sleeve and outer shells). Mounting bolts, washers or crush nuts are not always included—verify the product description or contact us if you need the bolt or complete fastener set.

How often should I replace rear shock mounting hardware?

Replace hardware when you notice lateral play, visible wear, corrosion, or after several seasons of heavy riding. Worn bushings accelerate shock and frame eyelet wear, so inspect them during regular suspension service intervals.

Can I use anti‑seize or grease on these sleeves?

Use a light application of waterproof grease on the sleeve during installation to prevent creak and corrosion. Avoid overpacking with grease and always follow the shock and frame manufacturer's lubrication recommendations.

Do I need a press or special tools to install this hardware?

Many installations can be completed with basic shop tools, but some frames require a bushing driver or press to remove/remove old shells without damaging the frame. If you're unsure, have a qualified bike mechanic perform the swap.

Will this hardware work with non‑RockShox shocks?

If the non‑RockShox shock specifies the same 10×30 mm bushing geometry and 1/2" interface, the hardware can fit, but always confirm dimension compatibility and clearances before installation.

Buying Guide

When buying shock mounting hardware, match the bushing dimensions (diameter and length), the bolt interface size, and the OEM part number whenever possible. Correct geometry prevents lateral play, protects the shock eyelet, and maintains suspension kinematics. If you're replacing hardware as part of a shock service or frame rebuild, buy a full set for both ends if they share the same dimensions, and consider replacing bolts or washers while you're at it. Keep a spare set in your toolkit if you ride frequently in wet or abrasive conditions.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product