RockShox Shock Hardware 10X33.5

$15.00

In Stock

OEM RockShox rear shock mounting hardware 10x33.5 (3-piece 1/2''). Precision-machined, corrosion‑resistant mounting kit for reliable rear suspension fit and alignment.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 10X33.5 is a factory-quality, three-piece rear shock mounting kit built to restore factory geometry and smooth articulation. The kit is listed under SRAM Model ID RS-SPP-A0 and RockShox part number 11.4118.091.010, making it the direct OEM replacement for compatible RockShox rear shocks and linkages. Each kit features a precision-machined steel sleeve and matching alloy/conforming spacers finished with a corrosion‑resistant coating to resist weather and trail grime. At a compact shipping footprint (4.15" x 2.5" x 0.65") and 0.1 lb weight, this hardware is engineered for tight tolerances that eliminate play, reduce noise, and protect shock bushings for long service life.

Key Features

Built to OEM standards: 3-piece 1/2" (10X33.5) configuration exacts the factory spacing and diameter for a direct swap without frame modification. Ideal for replacing worn or corroded hardware that causes side‑to‑side play. • Exact dimensions: 10 mm diameter x 33.5 mm length (1/2" reference) • SRAM/RockShox ID: RS-SPP-A0 / 11.4118.091.010 • Durable finish: Corrosion-resistant plating for long life in wet/muddy conditions • Precision fit: Tight tolerances to preserve shock alignment and bushing life

Fit & Compatibility

This kit is designed for rear shocks and linkages that accept a 10 mm diameter x 33.5 mm length mounting pin (listed as 10X33.5 / 1/2"). It's the OEM replacement hardware for certain RockShox models that specify SRAM Model ID RS-SPP-A0 — check your shock's service manual or OEM spec sheet to confirm compatibility. If you're replacing worn hardware, measure the distance between the inside faces of your shock eyelets and confirm the existing sleeve diameter. When in doubt, compare part numbers: RockShox 11.4118.091.010 is the direct match for this kit. For frames or aftermarket shocks that use different bushings or spacers, additional shims may be required.

Who It's For

This hardware is aimed at mountain bikers who demand reliable suspension performance from their rear shock — riders performing maintenance, replacing corroded or worn mounting pins, or rebuilding a shock linkage. It's especially useful for trail and enduro riders who expose components to mud, water and repeated impacts. Whether you're a home mechanic replacing a single pin or a shop performing a full shock service, the RockShox 10X33.5 kit gives you a precise, OEM-spec replacement to eliminate play, reduce wear on bushings, and restore confident rear-end feel.

Key Features

✓ OEM RockShox 3-piece rear shock mounting kit, RS-SPP-A0
✓ Exact dimensions: 10 mm diameter x 33.5 mm length (10X33.5)
✓ Precision-machined sleeve and spacers for a snug, wobble-free fit
✓ Corrosion-resistant finish built for wet, muddy trail conditions
✓ Direct-fit replacement for RockShox shocks with part 11.4118.091.010
✓ Low weight and compact size for easy storage and shipping
✓ Restores factory alignment and prolongs shock bushing life

Product Identifiers

Vendor Item #	11.4118.091.010
UPC	710845868689

Frequently Asked Questions

Will this fit my rear shock?

If your shock or linkage specifies a 10 mm diameter x 33.5 mm length mounting pin (10X33.5) or lists SRAM/RockShox Model ID RS-SPP-A0 or part number 11.4118.091.010, this is the direct OEM replacement. Always confirm by measuring the existing sleeve diameter and length or checking the shock's spec sheet.

What parts are included in the 3-piece kit?

The kit contains a precision-machined sleeve and the matching spacer/crush pieces required to recreate the factory mounting interface. It provides the hardware needed to replace worn mounting pins and restore correct spacing; it does not include dust seals or internal shock bushings.

Do I need special tools to install this?

Basic workshop tools are sufficient: a press or vise to press out/in sleeves, appropriate sockets or drivers for sleeves, and torque tools for reassembly. Use recommended torque values from your shock or frame manufacturer and avoid installing hardware by hammering to prevent damage.

Can I reuse my old bushings with this kit?

If the existing bushings are in good condition and within tolerance, they can be reused. However, if bushings show radial play, flat spots, or excessive wear, replace them when installing new hardware to ensure a long-lasting, precise fit.

Is there a corrosion warranty or special finish?

This RockShox kit uses a corrosion-resistant finish suitable for trail conditions, but like all exposed hardware it will wear over time. Rinse and dry hardware after wet rides and inspect periodically; replacement intervals depend on riding conditions and frequency.

How do I know if I need 10X33.5 instead of another length?

Measure the installed sleeve length or consult the shock/frame spec to confirm the exact mounting length. Using an incorrect length can alter suspension geometry or cause binding, so match the 33.5 mm specification exactly when replacing hardware.

Buying Guide

When buying rear shock mounting hardware, match three key specs: diameter, length, and OEM part number. Measure the installed sleeve and eye-to-eye spacing or consult your shock/frame manual — incorrect sizing changes suspension kinematics and can damage bearings or bushings. Choose OEM or OEM-equivalent kits like RockShox's 10X33.5 for guaranteed fit and tolerance. Consider material and finish (corrosion resistance), and plan to inspect or replace bushings when swapping hardware to ensure long-term, noise-free performance.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product