RockShox Shock Hardware 10X35.0
RockShox

RockShox Shock Hardware 10X35.0

$15.00
In Stock

Precision 3-piece rear shock mounting kit (10x35.0) from RockShox — durable, corrosion-resistant sleeve and end caps for secure rear-suspension mounting.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 10X35.0 (Manufacturer Part #: 11.4118.091.011, SRAM Model ID: RS-SPP-A0) is a precision 3-piece mounting kit designed to replace worn rear shock mount hardware. The 10x35.0 designation refers to the sleeve dimension—intended where a 10 mm bore and a 35 mm sleeve length are specified by the frame or shock maker. The kit is machined to tight tolerances for straight, low-play alignment of the shock eyelet. Components feature a hardened steel sleeve with a corrosion-resistant finish and alloy outer caps to resist fretting, reduce side-load wear and preserve suspension kinematics over thousands of cycles. Compact shipping dimensions (4.15" x 2.5" x 0.65") and 0.1 lb weight make it easy to carry as a field spare.

Key Features & Benefits

Durability and precision: The sleeve is precision-turned and heat-treated for strength and long service life, while end caps give a consistent bearing surface and resist groove wear where the bolt contacts the mount. Real-world benefits: Replacing worn hardware restores quiet suspension movement, eliminates play at the shock eyelet, prevents frame and shock damage from fretting, and maintains correct suspension geometry so your bike tracks and pedals as intended. • 3-piece kit engineered for rear shock mounts • Corrosion-resistant finish for longer service life • Precision tolerances to reduce lateral play and noise

Fit, Compatibility & Installation Notes

This kit is intended for bikes and shocks that call for a 10 x 35.0 mm sleeve in a 3-piece rear-shock mounting arrangement; it uses RockShox/SRAM model ID RS-SPP-A0 and fits any frame/shock interface with matching dimensions. Verify the eyelet inner diameter and the required sleeve length on your frame or shock before ordering. Installation tips: light grease on the sleeve helps assembly and prevents creak; tighten mounting bolts to your frame/shock manufacturer's torque spec and inspect for play after a few rides. If your system originally used bushings, replace them as required — this kit supplies the sleeve and outer caps, not rubber bushings or bolts unless stated in the product listing.

Who This Is For

Mountain bikers who maintain or refurbish their rear suspension — from trail riders to aggressive all-mountain cyclists — will benefit from this RockShox replacement hardware. It's an ideal part for riders who feel play in the shock eyelet, hear creaks from the rear end, or are servicing an older shock or frame. Mechanics and home wrenchers looking for a direct, OEM-compatible replacement with reliable materials and dimensions will find this kit a straightforward swap that restores proper function without expensive part-for-part shock replacement.

Key Features

  • ✓ OEM RockShox fit: Manufacturer Part # 11.4118.091.011, SRAM RS-SPP-A0
  • ✓ Precision 10 x 35.0 mm sleeve for tight, low-play shock mounting
  • ✓ Hardened steel sleeve with corrosion-resistant finish for longevity
  • ✓ Alloy outer caps reduce fretting and protect eyelet surfaces
  • ✓ 3-piece design for easy installation and secure alignment
  • ✓ Lightweight, compact kit — ideal as a service spare for trail repairs
  • ✓ Restores quiet suspension operation and corrects suspension geometry

Product Identifiers

Vendor Item # 11.4118.091.011
UPC 710845868696

Frequently Asked Questions

Will this fit my rear shock or frame?

This kit fits mounts that require a 10 x 35.0 mm sleeve and a 3-piece 1/2" series configuration. Check your frame/shock eyelet inner diameter and required sleeve length against 10x35.0 mm and confirm the SRAM/RockShox model ID (RS-SPP-A0) for a direct match.

Does the kit include mounting bolts or rubber bushings?

This product supplies the 3-piece mounting hardware (sleeve and outer caps). Mounting bolts and any rubber or polymer bushings are typically sold separately—inspect your original hardware and replace bushings as needed for a complete service.

How do I install the RockShox 10X35.0 hardware?

Press the sleeve into the shock or frame eyelet and fit the outer caps; use light grease to ease installation and reduce creak. Tighten the mounting bolt to the torque specified by your frame or shock manufacturer and re-check for play after a few rides.

How long will this hardware last?

Service life depends on conditions and riding style, but precision materials and corrosion-resistant finishes vastly improve longevity. Inspect hardware during routine suspension service — if you notice lateral play, visible scoring, or corrosion, replace the kit.

Is this compatible with non-RockShox shocks?

It can be compatible with other shocks or frames if the mount dimensions match (10 x 35.0 mm and 3-piece configuration). Always verify bore diameter, sleeve length and overall interface design before swapping.

Can I use threadlocker when installing?

Threadlocker is appropriate on mounting bolts if recommended by your frame or shock OEM. Avoid applying threadlocker to the sleeve itself; use light grease on bearing surfaces instead to prevent creak and permit proper alignment.

Buying Guide

When buying rear shock mounting hardware, measure the eyelet inner diameter and required sleeve length carefully — small differences (1–2 mm) can prevent proper seating and cause play or binding. Match the OEM part ID where possible (here, RockShox 11.4118.091.011 / SRAM RS-SPP-A0) to guarantee compatibility. Consider replacing associated components at the same time: mounting bolts, rubber bushings and, if your shock hasn't been serviced recently, shock seals. Buying a complete set of properly sized hardware ensures reliable suspension performance and reduces the chance of frame or shock damage from worn parts.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product