RockShox Shock Hardware 6X16.0
RockShox

RockShox Shock Hardware 6X16.0

$15.00
In Stock

OEM RockShox rear shock mounting hardware (3-piece 6x16.0) — precision fit, corrosion-resistant construction for secure, low-play rear suspension mounting.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & technology

RockShox Shock Hardware 6X16.0 (part #11.4118.091.601, SKU 942623) is a 3-piece rear shock mounting kit engineered for a direct OEM fit. Labeled by SRAM as RS-SPP-A0, this compact kit replaces worn eyelet sleeves, spacers and bushings to restore tight, quiet rear suspension performance. The kit uses a combination of precision-machined components — a heat-treated alloy steel sleeve or bolt, a hard-anodized aluminum spacer, and a low-friction polymer bushing — finished for corrosion resistance and long service life. These materials reduce side-to-side play, protect shock eyelets from wear, and keep your rear shock tracking smoothly under load.

Key features & benefits

Durable, corrosion-resistant construction — the steel sleeve is treated or plated to resist corrosion while the aluminum spacer is hard-anodized to prevent galling. Together with the engineered polymer bushing, the assembly stands up to mud, grit and repeated compression cycles. • 3-piece kit restores factory geometry and preload on the shock eyelet. • 6 x 16.0 mm sizing (listed as 1/2" 6X16.0) for a precise fit in compatible RockShox mounts. • OEM SRAM model ID RS-SPP-A0 guarantees compatibility with specified RockShox rear shocks and linkages.

Fit, sizing & compatibility

This kit is a direct-replacement mounting hardware set for RockShox rear shocks that use the 6x16.0 sleeve size and SRAM model ID RS-SPP-A0. The listed dimensions (3-piece, 1/2" 6X16.0) match common eyelet standards — confirm your shock or linkage guide to ensure the same sleeve inner diameter and length before ordering. Always cross-check the RockShox manufacturer part number (11.4118.091.601) or the Forest Bikes SKU (942623) with your shock service manual or OEM parts list. If you ride frames or shocks with proprietary hardware, check axle/pivot diameter and bushing thickness to avoid incorrect fitment.

Who this is for

Designed for mountain bikers and mechanics who need a reliable OEM replacement for worn or noisy rear shock pivots. It’s ideal for riders who want to eliminate play in the shock eyelet, restore proper suspension alignment, and keep a quiet, predictable rear end under load. If you maintain your own bike or service multiple RockShox-equipped frames, keeping a set of these in your parts stash is a low-cost way to extend the life of shocks and linkages and avoid premature wear to expensive components.

Key Features

  • ✓ OEM RockShox part 11.4118.091.601 — direct replacement hardware
  • ✓ 3-piece kit includes sleeve, spacer and polymer bushing
  • ✓ Precision 6 x 16.0 mm sizing for exact eyelet fit
  • ✓ Heat-treated alloy steel sleeve with corrosion-resistant finish
  • ✓ Hard-anodized aluminum spacer prevents galling and wear
  • ✓ Low-friction polymer bushing reduces play and noise
  • ✓ Fits SRAM Model ID RS-SPP-A0 specified RockShox mounts

Product Identifiers

Vendor Item # 11.4118.091.601
UPC 710845867729

Frequently Asked Questions

Will this fit my RockShox shock?

Check your shock's service or parts manual for the OEM part number or the required sleeve size. This kit is RockShox OEM 11.4118.091.601 (SRAM RS-SPP-A0) and designed for 6 x 16.0 mm eyelets; if your shock lists the same part number or dimensions it will fit.

What’s included in the 3-piece kit?

The kit contains a machined sleeve, a matching spacer and a precision polymer bushing — the three components needed to rebuild a standard shock eyelet mount and restore correct bearing clearance and alignment.

Can I reuse my old sleeve or bushing?

We recommend replacing worn sleeves and bushings rather than reusing them. Old components can be deformed or corroded, which leads to play, noise and accelerated wear on the shock eyelet and linkage bearings.

Do I need special tools to install this hardware?

Basic workshop tools are sufficient: a bench vise or press to install the sleeve without damaging it, hand tools to remove the shock and fasteners, and a torque wrench to tighten bolts to manufacturer specs. Avoid hammering parts in by hand to prevent damage.

How do I torque the mounting bolt?

Torque values vary by shock model and bolt size. Always follow the torque specification in your shock or frame manufacturer’s documentation. If in doubt, consult a qualified suspension technician or your local dealer to avoid over-torquing.

What maintenance intervals are recommended?

Inspect shock hardware whenever you service the shock or if you notice play, creaks, or unusual noises. Replace bushings and sleeves if you see corrosion, deformation, or increased side-to-side movement — typically during scheduled shock servicing intervals.

Buying Guide

When choosing replacement shock mounting hardware, match the OEM part number and sleeve dimensions first — in this case RockShox 11.4118.091.601 (SRAM RS-SPP-A0) and 6 x 16.0 mm sizing. Consider the materials: steel sleeves and hard-anodized aluminum spacers offer a balance of strength and corrosion resistance, while engineered polymer bushings provide low friction and noise reduction. Also check whether your frame or linkage uses sealed bearings or bushings that require different hardware profiles. If you perform your own maintenance, invest in a press and appropriate drivers to fit sleeves without damaging the eyelets; otherwise have a qualified shop handle the install to ensure correct alignment and torque.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product