RockShox Shock Hardware 6X25.4

$15.00

In Stock

OEM RockShox 3-piece rear shock mounting hardware (1/2" 6X25.4) — precision-machined replacement for secure, low-play rear suspension installs. SRAM ID RS‑SPP‑A0.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 6X25.4 (Part #11.4118.091.610, SRAM Model ID: RS‑SPP‑A0) is a compact 3-piece rear shock mounting kit engineered to restore OEM fit and function. Designed for the high loads and repeated articulation of mountain rear suspension, this kit gives a snug, low‑play connection between shock eyelets and frame linkages. The set is precision‑machined from high‑strength steel and finished with a corrosion‑resistant coating to endure wet, muddy and salty riding conditions. Each component is produced to tight tolerances so the sleeve and outer shells press together with minimal side‑to‑side play, reducing bushing wear and helping the shock operate exactly as intended by the manufacturer.

Key Features & Benefits

Purpose-built for dependable rear suspension performance. The 3-piece construction typically includes two outer shells and a hardened inner sleeve for a robust, low‑friction pivot. That architecture helps maintain alignment under heavy braking and rough terrain, translating to more consistent damper feel and longer bushing life. • OEM fit: RockShox part number 11.4118.091.610, SRAM Model ID RS‑SPP‑A0 for straightforward replacement. • Precision machining: Tight tolerances for minimal play and predictable suspension action. • Durable finish: Corrosion‑resistant coating protects components from the elements.

Fit, Sizing & Compatibility

This kit is specified as a 3‑piece set with a 1/2" mounting dimension and labeled 6X25.4. Use it to replace rear shock mounting hardware where the shock eyelet accepts a 1/2" pin and where the total sleeve/stack length matches 25.4mm. Always verify the eyelet inner diameter and the required sleeve length on your frame and shock before installation. Because it’s an OEM RockShox part, compatibility is highest with RockShox shocks and SRAM‑matched link systems, but the geometry and fit can also suit other shocks and frames that share the same pin diameter and length specification. If in doubt, compare this part number against your shock or consult your local bike shop for fit confirmation.

Who This Is For

This mounting kit is aimed at mountain bikers and mechanics who need a reliable OEM replacement for worn, corroded or damaged rear shock hardware. It’s ideal if you want to return your suspension to factory tolerances without buying a new shock or frame components. Whether you race cross‑country, rip technical singletrack, or maintain a workshop, this lightweight, durable kit is a practical spare that helps keep rear suspension operating smoothly and safely.

Key Features

✓ OEM RockShox replacement hardware, Part #11.4118.091.610
✓ SRAM Model ID RS‑SPP‑A0 for correct factory compatibility
✓ 3-piece design with hardened inner sleeve and outer shells
✓ Precision‑machined steel for tight tolerances and low play
✓ Corrosion‑resistant coating for longevity in wet conditions
✓ Designed for 1/2" mounting pins and 25.4mm sleeve length
✓ Lightweight kit — minimal added weight to the rear linkage

Product Identifiers

Vendor Item #	11.4118.091.610
UPC	710845867811

Frequently Asked Questions

What exactly is included in the 3-piece kit?

The 3-piece set contains the two outer shell pieces and a hardened inner sleeve required to assemble a single rear shock mounting pivot. It's intended to replace the worn sleeve/shell combination in the shock eyelet or frame linkage.

Will this fit my shock or frame?

This hardware is specified as 1/2" with a 6X25.4 length designation. It fits applications that accept a 1/2" pin and require a 25.4mm sleeve/stack. Confirm your shock eyelet inner diameter and required stack length before ordering; if unsure, check your shock model or consult a bike mechanic.

What material and finish are used?

The kit is made from high‑strength steel and finished with a corrosion‑resistant coating. Components are precision‑machined to OEM tolerances for durable, low‑play performance in harsh riding conditions.

Do I need any special tools to install it?

Installation typically requires a press or arbor tool to seat the outer shells without damaging them, plus appropriate sized sockets and a torque wrench for the pivot bolt. Avoid hammering parts into place; use a press or visit a shop if you lack the tools.

Should I grease the hardware during install?

Light lubrication on the sleeve is recommended to reduce initial friction and help prevent corrosion. Use a thin film of suspension‑safe grease; do not overpack with grease, and avoid threadlocker on the sleeve itself.

Is this an OEM RockShox part?

Yes — this is an original RockShox replacement part (11.4118.091.610) bearing the SRAM model ID RS‑SPP‑A0, intended to restore factory fitment and performance.

Buying Guide

When buying shock mounting hardware, match three key measurements: the pin diameter (here 1/2"), the sleeve or stack length (25.4mm in this kit), and the bushing type used by your shock or frame. Choosing OEM parts like this RockShox kit reduces the risk of mismatched tolerances and unexpected play in the suspension pivot. Also consider material and finish — high‑strength steel with corrosion protection is a good balance of durability and cost for most riders. If you ride in salty or coastal environments, prioritize corrosion‑resistant coatings and regular maintenance to extend hardware life.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product