RockShox Shock Hardware 6X31.75

$15.00

In Stock

Genuine RockShox 3-piece rear shock mounting hardware (6X31.75) — precision‑machined replacement that restores alignment and eliminates creaks on compatible mountain rear shocks.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 6X31.75 (Product #: 942636, Mfr Part #: 11.4118.091.614) is a precision 3-piece rear shock mounting kit designed to replace worn eyelet hardware and restore factory fit. Sold under SRAM model ID RS-SPP-A0, this kit matches the original RockShox specification for shocks that accept 1/2" mounting hardware and the 6x31.75 sleeve dimension. The kit's three-piece design—sleeve, outer spacer, and mounting bolt—maintains tight tolerances to minimize lateral play and creak while keeping the shock centered in the frame. Components are finished with a corrosion-resistant treatment to stand up to wet and muddy mountain conditions while remaining easy to service.

Key Features & Construction

This kit is built for durability and repeatable performance. The precision-machined sleeve seats snugly in the shock eyelet, while the outer spacer and hardened bolt secure the assembly without pinch or deformation. The combination provides a stable bearing surface that reduces side-to-side movement under pedaling and braking loads. Real-world benefits: less noise and slop from worn shock mounts, restored suspension kinematics, and a clean, factory-tight fit that prolongs the life of both shock and frame hardware. The low-mass package (ship weight ~0.1 lb) keeps added weight negligible while delivering a solid, serviceable repair solution.

Fit, Compatibility & Dimensions

This part is specified as: 3-piece 1/2" 6X31.75 with SRAM Model ID RS-SPP-A0. Use it to replace worn or damaged rear shock mounting hardware on RockShox-compatible shocks and frames that call out the 6x31.75 configuration. Always verify your shock/frame service manual for sleeve diameter and length compatibility before ordering. Shipping dimensions: 4.15" x 2.5" x 0.65" and weight: 0.1 lb. Installation typically requires common hand tools; torque values follow the shock or frame manufacturer recommendations—consult the service manual or a certified suspension tech for final torques.

Who It's For

This replacement kit is ideal for mountain bikers and mechanics who need a direct-fit, OEM-quality solution to worn rear shock eyelets. If you hear creaks, notice play at the shock mounts, or are rebuilding a bike after years of riding, this kit returns the mount geometry to spec. Trail, all-mountain, and enduro riders will appreciate the simple, reliable repair: it’s a small part that makes a big difference in suspension feel and frame compatibility. Suitable for home mechanics and pro shops alike.

Key Features

✓ Genuine RockShox 3-piece rear shock mounting hardware kit
✓ SRAM Model ID RS-SPP-A0 and Mfr Part #: 11.4118.091.614
✓ Precision-machined sleeve and spacer for tight tolerances
✓ Corrosion-resistant finish for wet and muddy trail use
✓ Restores factory fit to eliminate creaks and lateral play
✓ Compact, lightweight unit — ship weight approximately 0.1 lb
✓ Direct replacement for 6X31.75 specification rear shocks

Product Identifiers

Vendor Item #	11.4118.091.614
UPC	710845867859

Frequently Asked Questions

Will this fit my rear shock?

Confirm compatibility by checking your shock or frame service manual for 6x31.75 mounting hardware or the SRAM model ID RS-SPP-A0. If your shock specifies a 1/2" mounting configuration and 31.75mm sleeve length, this kit will be the correct replacement.

What tools and torque are required for installation?

Basic hand tools are typically sufficient to remove and install the bolt, sleeve, and spacer. Always tighten to the torque specified by the shock or frame manufacturer—if unsure, have a certified suspension tech perform the final torque and safety check.

Does the kit include bushings or bearings?

This is a 3-piece mounting hardware kit (sleeve, spacer, bolt) designed to restore the mounting interface. If your shock uses separate bushings or bearings, check the shock service parts list; those may be ordered separately if worn.

Can I reuse my old bolt or sleeve?

For best results replace the entire kit to ensure correct tolerances and corrosion protection. Reusing worn components can lead to continued play, noise, or premature wear on mating surfaces.

Is this an OEM RockShox part and what's the part number?

Yes—this is a genuine RockShox part. Product Number: 942636. Manufacturer Part #: 11.4118.091.614. It's listed under SRAM Model ID RS-SPP-A0.

Buying Guide

When replacing rear shock mounting hardware, measure the existing sleeve length and inner/outer diameters to match the 6X31.75 specification. OEM kits like this RockShox part ensure the correct fit and finish—vital to maintaining suspension kinematics and avoiding frame/shock damage. Also consider replacing related fasteners, bushings, or seals if they're aged. A small investment in correct hardware prevents creaks, excessive wear, and potential damage that can result from running mismatched or worn parts.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product