RockShox Shock Hardware 6X33.0

$15.00

In Stock

OEM RockShox 6X33.0 rear shock mounting hardware — a 3-piece, 1/2" replacement kit (SRAM ID RS-SPP-A0) engineered for precise fit, durability, and quiet suspension operation.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 6X33.0 (Part #11.4118.091.615 / SRAM ID RS-SPP-A0) is a factory replacement rear-shock mounting kit built to the tolerances RockShox demands. The 3-piece 1/2" assembly gives you the fasteners, spacers and bushings needed to restore correct shock articulation and eliminate play or binding at the shock eyelets. This compact kit is precision-made to match original equipment geometry and uses corrosion-resistant finishes on the fasteners and precision-moulded bushings to reduce friction and noise. Lightweight and low-profile, the hardware maintains the intended kinematics of your rear suspension while standing up to the rigours of trail, enduro and all-mountain riding.

Key Features & Benefits

Durable construction for consistent suspension performance. The 6x33.0 hardware is engineered to deliver a solid, repeatable interface between frame and shock—restoring alignment and preventing lateral movement that can cause uneven wear or degraded damping feel. Real-world benefits include reduced clunking, restored free stroke, and improved bearing life when worn or crushed OEM hardware is replaced. The kit's small footprint and OEM fitment make it a straightforward swap during shock service or a full replacement.

Fit, Compatibility & Installation Notes

This kit fits RockShox rear shocks and frames that specify a 6x33.0 shock mounting pin (6 mm diameter, 33.0 mm length) and is sold under SRAM Model ID RS-SPP-A0. Always confirm your shock/frame mounting dimensions before ordering—measure eyelet internal diameter and pin length or check your parts list against RockShox part number 11.4118.091.615. Installation is simple for a competent home mechanic: press or fit bushings and spacers as required, slide the pin through the eyelets and secure with the factory-retained fastener. Use RockShox service torque specs and a small dab of grease on the pin, avoiding excess that can attract dirt. If you’re unsure, have a qualified shop fit the hardware during a shock service to ensure correct preload and alignment.

Who This Is For

This replacement kit is ideal for mountain riders, mechanics and bike shops maintaining RockShox-equipped bikes. If you hear clunks from the rear suspension, notice side-to-side play at the shock eyelet, or are rebuilding a shock, this OEM 6X33.0 kit gives you the correct parts to restore factory fit and finish. It’s also the go-to choice for riders who want an exact OEM-spec replacement rather than a generic bolt or makeshift spacer—keeping suspension kinematics and warranty-friendly service consistent with RockShox standards.

Key Features

✓ OEM RockShox part 11.4118.091.615 for exact factory fit
✓ 3-piece 1/2" assembly engineered for shock eyelet mounting
✓ Spec: 6 mm diameter x 33.0 mm length mounting pin
✓ SRAM Model ID RS-SPP-A0 for straightforward OEM cross-reference
✓ Corrosion-resistant finish for long-term durability outdoors
✓ Precision bushings reduce friction and eliminate suspension noise
✓ Lightweight, low-profile hardware that preserves suspension kinematics

Product Identifiers

Vendor Item #	11.4118.091.615
UPC	710845867866

Frequently Asked Questions

How do I know this is the right size for my shock?

Confirm your shock or frame documentation shows a 6x33.0 mounting pin specification, or measure the eyelet internal diameter (should accept a 6 mm pin) and the pin-to-pin length required. You can also match the RockShox part number 11.4118.091.615 or SRAM ID RS-SPP-A0 to your shock’s parts list.

Can I reuse my old spacers and bushings?

We recommend replacing worn bushings and spacers with OEM parts when you notice play or visible wear. Reusing damaged or compressed bushings can reintroduce noise and misalignment; this 3-piece kit is intended to restore the original interface for quiet, smooth operation.

Do I need special tools to install this hardware?

Basic tools—hex keys, a torque wrench, and a press or soft mallet for bushing seating—are typically enough. Follow RockShox torque specifications and service instructions. If you don’t have a torque wrench or are unfamiliar with suspension assembly, a bike shop service is recommended.

Is this compatible with all RockShox rear shocks?

This kit is compatible with shocks and frames that use the 6x33.0 mounting dimension and that reference SRAM Model ID RS-SPP-A0. Not all RockShox shocks use the same pin sizes, so check the specific part number compatibility before purchasing.

How often should I replace shock mounting hardware?

Replace hardware when you detect play, noise, or visible wear on bushings and pins—typically during a regular shock service interval (every 50–200 hours depending on riding conditions). Riding in muddy or sandy environments accelerates wear and may require more frequent replacement.

Buying Guide

When buying shock mounting hardware, prioritize OEM part numbers and exact mounting dimensions (diameter x length). A correct replacement maintains the shock’s intended alignment and bearing preload, which preserves suspension feel and extends service intervals. Check the part number on your shock or in the RockShox parts list and confirm match to the 6x33.0 specification. Consider replacing hardware during a full shock service or whenever you replace seals and bushings—installing new mounting pins and bushings at the same time prevents premature wear and ensures quiet, reliable performance out on the trail.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product