RockShox Shock Hardware 6X45.0

$15.00

In Stock

OEM RockShox 3-piece rear shock mounting hardware (1/2" inner sleeve, 6x45.0) — precision-made replacement to restore proper fit and eliminate play. SRAM ID RS-SPP-A0.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 6X45.0 is a direct-fit, OEM three-piece mounting kit engineered to the same tolerances as factory RockShox rear shocks. Designed for 1/2" (12.7 mm) inner-sleeve applications, the 6X45.0 kit (PN 11.4118.091.622, SRAM Model ID: RS-SPP-A0) restores secure, rattle-free attachment between the shock eyelet and frame linkage. The kit features precision-machined components and corrosion-resistant materials to resist wear and maintain smooth rotational movement under load. Its compact 45 mm length fits a wide range of modern mountain bike rear shock mounts while shipping in a lightweight 0.1 lb package for easy service and replacement.

Key Features & Benefits

Durable construction: the three-piece set includes an engineered inner sleeve and two outer shells made to RockShox OEM specifications for long life and low friction. These parts reduce slop and prevent frame or shock wear, helping preserve suspension performance. • Precision fit: ground tolerances for minimal play and consistent alignment. • Corrosion resistance: surface treatments and stainless/hardened sleeve materials for wet and muddy conditions. • Service-ready: compact kit designed for quick swap during routine shock service or after wear is detected.

Fit, Size & Compatibility

This kit is specified as a 3-piece, 1/2" mounting assembly with a 6x45.0 form factor and matches RockShox part number 11.4118.091.622. It's intended for rear shocks and frames that use a 12.7 mm internal sleeve diameter and require a 45.0 mm length mounting hardware. Before purchase, confirm your shock and frame accept a 1/2" (12.7 mm) sleeve and that the 45.0 mm overall length aligns with your linkage spacing. If in doubt, check your shock's service manual or consult Forest Bikes with your bike make/model and shock part number; the SRAM Model ID for this kit is RS-SPP-A0.

Who This Is For

Ideal for mountain bikers, mechanics and home wrenchers who need an OEM-quality replacement to eliminate play, squeak or rough pivoting at the shock eyelet. If your rear shock shows lateral movement, noise, or visible wear in the bushings, this kit brings the factory spec back to your suspension. Also suitable for bike shops stocking common RockShox service parts — compact, lightweight and easy to carry for trailside repairs or scheduled shock maintenance.

Key Features

✓ OEM RockShox 3-piece rear shock mounting hardware kit
✓ 1/2" (12.7 mm) internal sleeve designed for rear shock eyelets
✓ 45.0 mm length fits common RockShox mounting spacings
✓ Precision-machined components for minimal play and smooth motion
✓ Corrosion-resistant materials for wet, muddy riding conditions
✓ SRAM Model ID RS-SPP-A0 matches factory replacement listings
✓ Lightweight, service-ready kit ideal for on-trail repairs

Product Identifiers

Vendor Item #	11.4118.091.622
UPC	710845867934

Frequently Asked Questions

What exactly is included in the 3-piece kit?

The 3-piece kit contains the inner sleeve and two outer shells designed to form the mounting bushing assembly. These pieces work together to locate and secure the shock eyelet while allowing controlled rotation. (Hardware such as mounting bolts/pins are not always included; verify before ordering.)

How do I confirm this 6X45.0 kit fits my bike?

Measure the internal sleeve diameter of your current shock mount — this kit fits a 1/2" (12.7 mm) sleeve — and confirm the required overall length is 45.0 mm. Cross-check with your shock or frame manual and the RockShox part number 11.4118.091.622 or SRAM ID RS-SPP-A0.

Can I reuse my old bolts with this hardware?

If the mounting bolts/pins remain straight and free of corrosion or damage you can usually reuse them. However, inspect threads and bearing surfaces — replacing bolts along with bushings is recommended when wear or deformation is present to ensure a reliable install.

Is this an OEM RockShox part?

Yes — this product is the RockShox OEM replacement part (PN 11.4118.091.622) manufactured to factory tolerances and identified by SRAM Model ID RS-SPP-A0 for compatibility with relevant RockShox rear shock mounts.

How often should I replace rear shock mounting hardware?

Replacement intervals depend on riding conditions and frequency, but inspect hardware every 6–12 months for play, corrosion, or visible wear. Replace sooner if you experience noise, increased lateral movement, or uneven wear marks.

Do I need special tools to install this kit?

Basic bike shop tools are usually enough: appropriate-size sockets/hex keys for removing mounting bolts, a press or gentle mallet to install new bushings without damaging them, and anti-seize or light grease as recommended by your shock manufacturer.

Buying Guide

When buying rear shock mounting hardware, match the exact OEM part number or confirm the inner sleeve diameter and overall length. Using the correct size prevents play, reduces uneven wear, and keeps your suspension operating as designed. Opt for OEM or OEM-equivalent kits like RockShox PN 11.4118.091.622 when possible — they are machined to the same tolerances as the shock and frame interfaces and are often the safest choice for maintaining factory performance and warranty integrity.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product