RockShox Shock Hardware 8X22.2

$15.00

In Stock

Genuine RockShox 3-piece rear shock mounting hardware (1/2" 8X22.2) — durable, precision fit for RockShox shocks. Ideal replacement kit with SRAM model ID RS-SPP-A0.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X22.2 is a compact, purpose-built 3-piece rear shock mounting kit engineered to restore smooth articulation and secure suspension attachment. Designed to RockShox's factory tolerances and identified by SRAM Model ID RS-SPP-A0, this hardware brings the exact fit and finish required for reliable rear-shock performance. The kit is built from high-strength, precision-machined steel with a corrosion-resistant surface treatment for long life in wet and muddy conditions. Where applicable, the assembly uses low-friction polymer bushing interfaces to reduce play, limit wear and keep noise to a minimum — delivering predictable, quiet suspension action ride after ride.

Key Features

Built to spec: This 3-piece kit matches RockShox mounting geometry for a seamless, factory-correct installation. The listed dimension 8X22.2 denotes the sleeve diameter and length (8 mm × 22.2 mm), and the kit is intended for 1/2" eyelet interfaces. • Factory part: RockShox / SRAM model RS-SPP-A0, MPN 11.4118.091.809. • Durable construction: Precision steel sleeves with corrosion-resistant finish and low-friction bushings. • 3-piece kit: Complete set for a single shock mount — fast, clean replacement. • Lightweight packaging: Ships small and light (5.25" x 4" x 0.5", 0.1 lb).

Fit & Compatibility

This hardware is specified as 8X22.2 and intended for rear shock eyelets that accept a 1/2" pin with an 8 mm sleeve diameter and a 22.2 mm sleeve length. It is a genuine RockShox replacement part (MPN 11.4118.091.809), so it's the first choice when restoring factory fit and alignment on compatible RockShox rear shocks and frames designed around that spacing. Before ordering, measure your shock mount: check the internal eyelet diameter, the pin diameter, and the required sleeve length. If you have any doubt, reference your shock/frame service manual or contact Forest Bikes support with your bike model and shock serial/model to confirm fitment. Always install with the manufacturer's recommended torque and service practices to avoid binding or premature wear.

Who It's For

This part is aimed at mountain bikers, mechanics and home wrenchers who need an OEM-quality replacement for worn or damaged shock mount hardware. If your shock shows side-to-side play at the eyelet, squeaks, or visible sleeve corrosion, replacing the mounting hardware with a factory RockShox kit is an efficient way to restore proper suspension operation. It's also a practical item for workshop spares — small, inexpensive to carry, and crucial for trailside repairs or full suspension rebuilds. Ideal for riders who value factory-correct fit and longevity across trail, all-mountain and enduro use.

Key Features

✓ Genuine RockShox 3-piece rear shock mounting hardware kit
✓ Precision-machined steel sleeves with corrosion-resistant finish
✓ 8 x 22.2 mm sleeve dimension for 1/2" shock eyelet interfaces
✓ SRAM Model ID RS-SPP-A0; MPN 11.4118.091.809
✓ Low-friction polymer bushing interfaces to reduce play and noise
✓ Compact, lightweight kit — ships 5.25" x 4" x 0.5", 0.1 lb
✓ Ideal OEM replacement for worn or damaged shock mounts
✓ Simple swap-in installation when following manufacturer specs

Product Identifiers

Vendor Item #	11.4118.091.809
UPC	710845868054

Frequently Asked Questions

What does 8X22.2 mean and will it fit my shock?

8X22.2 indicates the sleeve diameter and length (approx. 8 mm diameter × 22.2 mm length) intended for 1/2" eyelet mountings. To confirm fit, measure your shock eyelet inner diameter and the required sleeve length, or check your shock/frame service manual. If you’re unsure, provide your bike and shock model to Forest Bikes support for verification.

What parts are included in the 3-piece kit?

The kit is sold as a three-piece assembly for a single mounting location and typically includes the mounting sleeve(s) and any spacers/bushings required for a factory fit. Exact included components match RockShox OEM specifications for the RS-SPP-A0 model.

Can I reuse my old hardware if it looks OK?

If hardware shows any signs of corrosion, scoring, or side-to-side play, replacement is recommended. Even small wear on sleeves or bushings can lead to noise and premature frame or shock eyelet damage. For peace of mind and optimal suspension performance, replace worn mounting hardware rather than reusing.

Do I need grease or special tools to install this kit?

Use a light film of suspension-safe grease on the sleeves and bushings during installation to reduce friction and prevent creaks. Installation requires basic shop tools; however, follow the shock and frame manufacturer's torque specs and alignment procedures. If you don't have the correct torque wrench or experience, have a qualified mechanic install it.

How often should I replace shock mounting hardware?

Replacement frequency depends on riding conditions and mileage. Inspect mountings during regular suspension service intervals — typically every 100–200 hours of riding or annually. Replace sooner if you notice play, noise, or visible wear.

Is this part covered by warranty?

Warranty coverage depends on RockShox's and your bike manufacturer's policies. If the hardware fails due to a manufacturing defect, it may be covered; damage from wear, improper installation, or crash incidents is typically excluded. Keep purchase records and consult RockShox or your local dealer for warranty claims.

Buying Guide

When choosing rear shock mounting hardware, match the exact OEM dimensions (diameter and length) and the manufacturer part number whenever possible — factory parts ensure correct tolerances and alignment. Verify the eyelet diameter, pin size and sleeve length on your shock/frame before purchase. Prefer kits with corrosion-resistant treatments and low-friction bushings to extend service life. Keep spare hardware in your workshop or tool roll if you frequently ride in wet or gritty conditions; a small kit can prevent a long walk home or an expensive repair down the line.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product