RockShox Shock Hardware 8X24.0

$15.00

In Stock

Genuine RockShox 3-piece rear shock mounting hardware (1/2" 8X24.0) delivering OEM fit and reliable, corrosion-resistant performance for rear suspension installs.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X24.0 is a genuine OEM rear shock mounting kit designed to give your bike factory-level fit and finish. This 3-piece 1/2" 8X24.0 assembly (SRAM Model ID: RS-SPP-A0, Part #: 11.4118.091.813) is engineered to meet RockShox durability and tolerance standards so your rear shock mounts securely, precisely, and quietly. The kit is precision manufactured to maintain correct eyelet spacing and alignment under load, helping prevent premature bushing wear and squeaks. Finished with a corrosion-resistant coating typical of RockShox hardware, it balances strength and longevity for everyday trail use and regular maintenance cycles.

Key Features & Benefits

Built for secure suspension performance. The three-piece design gives a stable connection between frame and shock while allowing for easy disassembly during complete service or shock swaps. Exact dimension control reduces lateral play and maintains consistent suspension behavior through the travel. Practical advantages: easy OEM replacement, quiet operation with correct bushing preload, and robust mounting under impacts and mud. The compact kit is also lightweight, keeping unsprung weight low where it matters most.

Fit, Specifications & Compatibility

This kit is specified as 1/2" 8X24.0 and matches RockShox-recommended eyelet sizing for applicable rear shocks. Manufacturer part number 11.4118.091.813 and SRAM Model ID RS-SPP-A0 help confirm correct selection for your bike or shock. Before ordering, measure your shock eyelet internal diameter and the overall length required by your frame/shock layout. If your frame or shock uses different bushing sizes or a different bolt diameter, this kit will not fit — always confirm with your service manual or contact Forest Bikes for fit help.

Who This Is For

This hardware kit is for mountain bikers, mechanics, and home wrenchers who need a direct OEM replacement for RockShox-compatible rear shock mounts. It's especially useful during shock service, swap, or after a crash when mounting hardware can be bent or corroded. If you value correct suspension behavior, quiet operation, and an exact OEM fit rather than generic aftermarket alternatives, this RockShox 8X24.0 kit is an inexpensive but impactful upgrade to keep your rear suspension performing as designed.

Key Features

✓ Genuine RockShox OEM 3-piece rear shock mounting hardware kit
✓ Spec: 1/2" 8X24.0 — precise dimensions for factory fit
✓ SRAM Model ID RS-SPP-A0; Manufacturer P/N 11.4118.091.813
✓ Precision-machined components with corrosion-resistant finish
✓ Lightweight assembly minimizes added unsprung weight
✓ Simple swap-in replacement during shock service or repair
✓ Helps prevent lateral play and reduces squeaks under load

Product Identifiers

Vendor Item #	11.4118.091.813
UPC	710845868092

Frequently Asked Questions

Will this fit my rear shock?

This kit fits shocks and frames that require a 1/2" 8X24.0 mounting hardware specification and matches RockShox OEM dimensions. Check your shock eyelet internal diameter and consult your service manual or the shock's part list to confirm compatibility with SRAM Model ID RS-SPP-A0 or part number 11.4118.091.813.

What exactly is included in the 3-piece kit?

The 3-piece designation typically refers to the combined assembly of sleeve, outer spacer/washer, and retaining bolt components required for the shock eyelet mount. If you need a detailed parts breakdown for your specific shock, contact Forest Bikes or reference RockShox documentation to confirm the included items.

Do I need special tools to fit this hardware?

Installation requires basic bike workshop tools — appropriate hex/torque wrench and possibly a drift for removing old sleeves. Always tighten to the shock and frame manufacturer's torque specification and use a calibrated torque wrench for the final pass to avoid damage.

Can I reuse the old bushings with this new hardware?

Reusing bushings is possible only if they are in good condition and match the new sleeve dimensions. However, RockShox recommends replacing worn bushings and sleeves together to maintain correct clearances and prevent premature wear or creaking.

Is this compatible with aftermarket shocks?

Compatibility depends on the eyelet sizing of the aftermarket shock. If the shock uses a 1/2" 8X24.0 mounting spec, this kit will fit. Always cross-check the shock manufacturer's specifications before installing OEM RockShox hardware on non-RockShox shocks.

What material and finish is the hardware?

This RockShox OEM hardware is manufactured to industry-grade standards with hardened components and a corrosion-resistant finish. If you require a specific material spec (e.g., stainless vs plated steel), consult RockShox technical documentation or contact Forest Bikes for confirmation.

Buying Guide

When buying rear shock mounting hardware, prioritize exact fit: match the bolt diameter, sleeve length, and manufacturer's part number. OEM kits like this RockShox 8X24.0 ensure the correct tolerances and finishes, reducing the chance of creaks, premature wear, or improper shock alignment. Measure your existing hardware, compare the SRAM model ID or RockShox part number, and if you're replacing bushings or doing a full shock service, purchase the bushings, seals, and correct torque tool at the same time to streamline installation and maintenance.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product