RockShox Shock Hardware 8X24.2

$15.00

In Stock

Genuine RockShox rear shock mounting hardware (3-piece 8x24.2) for direct OEM replacement. Durable, precision-machined kit restores rear suspension articulation and eliminates play.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X24.2 (Manufacturer Part #: 11.4118.091.814, Product #942660) is a genuine OEM rear shock mounting hardware kit designed to RockShox/SRAM specifications (SRAM Model ID: RS-SPP-A0). The kit is a compact 3-piece set engineered to rebuild the shock eyelet interface and restore the original smooth articulation between frame and shock. The assembly centers on a precision-machined, heat-treated steel sleeve finished with a corrosion-resistant plating and matched polymer/composite bushings for low-friction movement. That combination reduces slop, resists wear, and keeps the shock pivot operating quietly and predictably through rough mountain terrain.

Key Features & Benefits

Built to OEM spec: This RockShox kit matches factory tolerances for fit and function, giving consistent performance after service or part replacement. The compact 8x24.2 sizing (8mm bore, 24.2mm length) is a common measurement on many rear shock eyelets. • 3-piece design — sleeve plus two bushings for secure, low-friction mounting. • Precision machining — ensures concentricity and minimal play at the eyelet. • Corrosion-resistant finish — extends service life in wet and muddy conditions. • OEM compatibility — SRAM/RockShox model ID RS-SPP-A0 for direct replacement.

Fit, Installation & Compatibility

This hardware is intended for rear shock eyelets that accept an 8mm pin and require a 24.2mm overall sleeve length. The listing corresponds to RockShox / SRAM OEM spec; always verify eyelet bore and overall length before ordering. If your current sleeve measures 8mm internal diameter and about 24.2mm long, this kit is likely the correct match. Installation is straightforward: press the polymer bushings into the shock eyelets, slide the steel sleeve through, then install the shock mounting bolt. Use a calibrated torque wrench and the shock/bike manufacturer's torque specs. Replace hardware as matched pairs when possible and inspect seals/bearings at the same time to ensure optimal suspension performance.

Who This Kit Is For

This is an essential spare for mountain bikers, mechanics, and shops who perform regular suspension service or need an OEM-quality replacement during a shock swap. Ideal for riders who want to eliminate play or noise at the rear shock pivot and restore factory tightness without replacing the entire shock or link hardware. Perfect for trail, all-mountain, and enduro riders who regularly ride in variable conditions and want a reliable, long-lasting mounting solution that matches RockShox factory tolerances.

Key Features

✓ Genuine RockShox OEM part number 11.4118.091.814, direct replacement
✓ 3-piece kit with precision steel sleeve and low-friction polymer bushings
✓ 8mm bore fits eyelets that accept 8x24.2 mounting hardware
✓ 24.2mm sleeve length restores correct suspension geometry and spacing
✓ Corrosion-resistant finish for long life in wet and muddy conditions
✓ SRAM Model ID RS-SPP-A0 verified for RockShox rear shocks

Product Identifiers

Vendor Item #	11.4118.091.814
UPC	710845868108

Frequently Asked Questions

How do I know this 8X24.2 hardware will fit my shock?

Measure the inner diameter of the eyelet (should be 8mm) and the required sleeve length (around 24.2mm). Cross-check your shock or frame service manual with the SRAM Model ID RS-SPP-A0 or RockShox part number 11.4118.091.814 to confirm compatibility.

Can I install this kit myself or should a shop do it?

Installation is straightforward for a competent home mechanic: press bushings, slide sleeve, and torque the mounting bolt to the manufacturer's specification. If you lack the right tools (press or torque wrench) or are unsure about fit, have a qualified bike mechanic install it to avoid damage.

What maintenance do these bushings require?

Inspect the hardware during routine suspension service. Keep the interface clean and lightly lubricated where appropriate (follow RockShox service guidelines). Replace bushings if you notice play, binding, or visible wear—typically during shock servicing intervals.

Should I replace both sides or just the worn one?

For best results replace both sides or the entire kit on that mounting point to ensure even wear and consistent fit. Mixing old and new hardware can cause uneven loading and premature wear.

Is this kit compatible with aftermarket bolts or other brands?

The sleeve/bushing dimensions (8x24.2) are dimension-based, so compatible bolts that match 8mm pin diameter and correct length and head style can be used. However, for guaranteed fit and finish, using OEM or OEM-spec bolts is recommended.

Buying Guide

When buying rear shock mounting hardware, prioritize correct dimensions (bore and sleeve length), OEM compatibility, and materials that resist corrosion and wear. Measure your current sleeve and eyelet, note the manufacturer part number, and match the SRAM/RockShox model ID when possible. Keep a spare hardware kit in your tool box if you service your bike often or ride in wet/muddy conditions. Replacing worn bushings and sleeves during regular shock service is a small cost that preserves suspension performance and prevents bigger repairs down the line.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product