RockShox Shock Hardware 8X25.0

$15.00

In Stock

OEM RockShox 3-piece rear shock mounting hardware (8X25.0, RS-SPP-A0)—precision sleeve and bushings for reliable rear shock mounting and long service life.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X25.0 (Manufacturer Part # 11.4118.091.816, SRAM Model ID: RS-SPP-A0) is a factory replacement 3-piece rear shock mounting kit designed to maintain correct alignment and smooth articulation at the shock eyelet. This compact kit ships at just 0.1 lb and uses the same dimensional spec RockShox uses on OEM builds, ensuring fit and function with compatible RockShox and SRAM rear shocks. The kit is engineered for durability and repeatable performance: a precision-machined sleeve and mating bushings create a low-friction pivot interface that resists wear under load. The components are finished to resist corrosion and stand up to wet, muddy, and abrasive trail conditions so your rear suspension stays true ride after ride.

Key Features & Benefits

Built to OEM standards: This 3-piece hardware meets RockShox tolerance and spec requirements (8X25.0 / 1/2" eyelet context), providing a like-for-like replacement for worn or lost shock mounting parts. Using OEM hardware preserves shock geometry and rebound/shaft alignment. Performance where it counts: The sleeve-and-bushing arrangement reduces side-to-side play and minimizes binding through the shock travel, resulting in consistent suspension performance, improved tracking and longer shock life. Lightweight and compact, the kit replaces worn parts without adding unnecessary weight.

Fit, Installation & Compatibility

This kit is specified as a 3-piece 1/2" (factory designation) with RockShox sizing 8X25.0—confirm your bike or shock's eyelet specification before ordering. It carries RockShox part number 11.4118.091.816 and SRAM Model ID RS-SPP-A0 (Product #942662). Typical installation requires pressing the bushings into the shock eyelet and sliding the sleeve into place; some frames use similar hardware but always verify diameter and length match your original hardware. Practical notes: Installation is straightforward with basic shop tools (bench vise or press for bushings, correct-size driver and torque wrench for pivot hardware). Grease the sleeve lightly with a suspension-approved grease to reduce initial friction and prevent corrosion. If you're uncertain about fit, bring your original hardware or shock spec to our shop and we can confirm compatibility.

Who This Is For

This RockShox 8X25.0 shock hardware kit is for mountain bikers who need a reliable, OEM-spec replacement for rear shock eyelet hardware—whether you're refreshing a bike with high hours on the clock, replacing lost or damaged parts after a crash, or stocking spares for long rides and bikepacking trips. It's well suited to riders who value correct suspension geometry and low-maintenance durability: mechanics, home wrenchers, and riders running RockShox rear shocks who want a simple, proven part that restores factory performance.

Key Features

✓ OEM RockShox 3-piece rear shock mounting hardware kit (8X25.0)
✓ Manufacturing part #: 11.4118.091.816; SRAM Model ID RS-SPP-A0
✓ Precision-machined sleeve and press-fit bushings for low friction
✓ Corrosion-resistant finish for durability in varied trail conditions
✓ Direct replacement to preserve factory shock alignment and travel
✓ Compact, lightweight kit — ships at 0.1 lb with small footprint
✓ Ideal for replacing worn or damaged shock eyelet hardware

Product Identifiers

Vendor Item #	11.4118.091.816
UPC	710845868122

Frequently Asked Questions

Will this fit my rear shock?

This kit matches RockShox's 8X25.0 hardware spec and uses the factory 1/2" eyelet designation. Confirm your shock or frame's eyelet diameter and length against the part number (11.4118.091.816) before purchase. If you have the original hardware, compare dimensions or bring it to our shop for verification.

What parts are included in the 3-piece kit?

The 3-piece kit includes the central sleeve and two mating bushings that press into the shock or frame eyelet. These three components together recreate the factory pivot interface that secures the shock to the frame.

Do I need special tools to install this hardware?

Basic shop tools are usually sufficient: a bench vise or bushing press to seat press-fit bushings, correct-size drivers for associated bolts, and a torque wrench for final assembly. If you lack a press, a local bike shop can install them quickly.

Should I use grease or threadlocker during installation?

Lightly coat the sleeve with a suspension-approved grease to reduce friction and help prevent corrosion. Avoid grease on bolt threads — use the threadlocker or torque spec recommended by your shock or frame manufacturer for fasteners.

Can I use this kit on non-RockShox shocks?

Possibly, if the eyelet diameter and sleeve length match your shock/frame. OEM parts are designed for RockShox tolerances, so cross-compatibility depends on matching those dimensions exactly—always verify before fitting.

How often should I replace shock mounting hardware?

Replace mounting hardware if you notice play at the eyelet, corrosion, distorted bushings, or after significant impacts. Regular inspection during service intervals (every 50–100 hours depending on conditions) keeps suspension performance predictable.

Buying Guide

When buying shock mounting hardware, prioritize OEM part numbers and exact dimensions over generic descriptions. Check the manufacturer part number (11.4118.091.816) and SRAM Model ID (RS-SPP-A0) against your shock or frame documentation. A correct-fit kit prevents binding, maintains proper shock stroke, and avoids accelerated wear. Consider replacing mounting hardware as part of regular suspension service or after hard impacts. If you're unsure about press-fit installation, a local mechanic can seat bushings and verify alignment quickly—saving you from potential issues on the trail.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product