RockShox Shock Hardware 8X33.0
OEM RockShox 8X33.0 rear shock mounting hardware — 3-piece 1/2" (11.4118.091.828). Precision-machined, corrosion-resistant hardware for secure, quiet rear suspension mounting.
Add to CartProduct Details
Overview & Technology
Key Features & Materials
Fit, Compatibility & Dimensions
Who This Is For
Key Features
- ✓ OEM RockShox part 11.4118.091.828 for exact factory fit
- ✓ 3-piece 1/2" (8 mm) x 33.0 mm mounting hardware kit
- ✓ Precision-machined hardened steel construction for strength
- ✓ Corrosion-resistant finish to withstand wet, muddy rides
- ✓ Restores shock alignment, reduces play and creaks
- ✓ Compact, lightweight kit — easy to carry as a spare
- ✓ SRAM Model ID RS-SPP-A0 — confirmed RockShox compatibility
Product Identifiers
Frequently Asked Questions
What exactly comes in the 3-piece Shock Hardware 8X33.0 kit?
The kit is a compact 3-piece assembly designed to replace the mounting interface at the rear shock. It includes the outer eyelet hardware and the internal sleeve/bolt arrangement sized 1/2" (8 mm) with a 33.0 mm length to match RockShox specifications. Check the included packing or RockShox service docs for an exact parts breakdown.
How do I know if 8X33.0 is the correct size for my bike?
Measure the existing shock mounting hardware: confirm the bore diameter (8 mm / 1/2") and the length (33.0 mm). Alternatively, consult your frame or shock manufacturer’s specifications or the RockShox parts list for your shock model. If in doubt, bring the old hardware to your local shop for verification.
Can I install this kit at home or should a shop fit it?
A competent home mechanic with basic suspension tools can replace mounting hardware safely. Use proper sockets, a torque wrench, and follow torque specs from your shock/frame manufacturer. If you’re unsure about alignment, torque values, or bushings, have a professional mechanic install it to avoid damage or premature wear.
How often should shock mounting hardware be replaced?
Replacement intervals vary by riding conditions and hours on the bike. Inspect hardware whenever you service the shock or notice play, noise, or corrosion. Many riders replace mounting hardware when they replace shock bushings or every time the shock comes out for service to ensure a fresh, tight fit.
Is this compatible with non-RockShox shocks or third‑party frames?
This kit is designed to RockShox OEM dimensions. It may fit other shocks or frames that use the same 8 mm bore and 33.0 mm length, but compatibility isn’t guaranteed. Always verify dimensions and clearances before installing on non-RockShox components.
Does the kit include crush washers, seals or grease?
The 3-piece hardware kit focuses on the mounting hardware itself and typically does not include shock seals or service grease. When replacing hardware, it’s good practice to inspect and service bushing seals and apply appropriate suspension grease as recommended by the shock manufacturer.
Buying Guide
Choosing the right rear shock mounting hardware starts with accurate measurement: confirm the bore diameter (here 8 mm / 1/2") and the overall length (33.0 mm). OEM RockShox kits like the 8X33.0 are engineered to match the tolerances and materials used by the original shock, reducing the risk of play, creaks, or premature wear. When replacing hardware, consider doing it alongside bushing service. Fresh hardware plus new bushings and proper lubrication restores factory alignment and minimizes future suspension maintenance. If you’re unsure about fitment, check your shock and frame specifications or contact a Forest Bikes suspension specialist for guidance.
Ready to order?
Shop with confidence at Scenders — premium cycling parts, fast shipping.
View Full Product