RockShox Shock Hardware 8X36.0

$15.00

In Stock

OEM RockShox 3-piece rear shock mounting hardware (1/2" 8X36.0) — precision-fit replacement with corrosion-resistant finish and sealed bushings for dependable rear-suspension performance.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X36.0 is an OEM-quality 3-piece rear shock mounting kit (1/2" diameter, 36.0mm length) designed to restore the original fit and function of your RockShox rear shock. Supplied as part number 11.4118.091.833 and identified by SRAM Model ID RS-SPP-A0, this compact kit replaces worn or damaged eyelet hardware to remove play and protect suspension bearings. The kit is precision-machined for tight tolerances, combining a corrosion-resistant metal sleeve with purpose-built polymer bushings to deliver smooth articulation and long service life. Lightweight and compact (shipping dims 5" x 4" x 0.5", 0.1 lb), it’s ideal for workshop repairs and field service when you need a dependable OEM replacement.

Key Features

Durable construction: The 3-piece assembly uses a hardened metal sleeve with a corrosion-resistant finish plus low-friction polymer bushings to resist wear under load and reduce creak. Precision fit: Engineered to RockShox tolerances for consistent alignment, minimal play, and even load transfer through the shock eyelet. The kit meets OEM dimensional specs (1/2" diameter, 8X36.0) for direct compatibility with specified RockShox models. • OEM Part #: 11.4118.091.833 • SRAM Model ID: RS-SPP-A0 • 3-piece design: sleeve + two bushings

Fit & Compatibility

This hardware is intended for RockShox rear shocks and linkages that call for a 1/2" (12.7 mm) mounting pin with an 8X36.0 length specification. It’s a direct-replacement OEM part—use it to restore factory tolerances and correct articulation on compatible RockShox rear-suspension assemblies. Before ordering, confirm the eyelet inner diameter and required sleeve length on your shock or frame linkage. If your bike uses different bushing materials or floating hardware systems, cross-check SRAM Model ID RS-SPP-A0 or consult manufacturer fit charts to ensure compatibility.

Who It's For

This kit is for mountain bikers, mechanics and home wrenchers who want an OEM-quality replacement for worn or noisy rear shock hardware. If your rear shock shows lateral play, creaks at the eyelet, or you’re performing a damper swap or service, this part brings back tight, quiet suspension action. Riders doing regular maintenance, workshop techs rebuilding rear shocks, and anyone upgrading from generic hardware to OEM RockShox spec will benefit from the durability and fit of this 8X36.0 kit.

Key Features

✓ OEM RockShox 3-piece rear shock mounting kit for exact fit
✓ 1/2" diameter sleeve with 36.0mm length for specified eyelets
✓ Corrosion-resistant metal sleeve for long-term durability
✓ Low-friction polymer bushings reduce noise and wear
✓ SRAM Model ID RS-SPP-A0 and part #: 11.4118.091.833
✓ Lightweight, compact replacement—easy to carry for field repairs
✓ Restores factory tolerances and reliable rear suspension performance

Product Identifiers

Vendor Item #	11.4118.091.833
UPC	710845868290

Frequently Asked Questions

What does 8X36.0 mean for this shock hardware?

8X36.0 indicates the specific dimensional spec for the sleeve length and internal sizing used by RockShox. It ensures the sleeve length and bushing stack match the intended eyelet spacing for compatible shocks and linkages. Always verify your shock’s required sleeve length before purchasing.

Is this a direct replacement for my RockShox rear shock?

If your shock or frame linkage calls out a 1/2" (12.7 mm) mounting pin and the 8X36.0 length, this is an OEM direct replacement (RockShox part 11.4118.091.833). Cross-reference SRAM Model ID RS-SPP-A0 in your service documents or RockShox parts lists to confirm compatibility.

What materials are used in the 3-piece assembly?

The kit combines a precision-machined metal sleeve with corrosion-resistant finish and matched polymer bushings. This combination offers a balance of strength, low friction, and resistance to wear and corrosion in suspension pivots.

How do I install this shock hardware safely?

Install using the correct sized mounting bolt and recommended torque for your shock/frame. Press bushings and sleeve in squarely to avoid damage and apply silicone-based grease on bushing faces if recommended by the shock manual. If you’re unsure, have a qualified mechanic perform the installation.

Can I service bushings separately or do I replace the whole kit?

The 3-piece format is intended to be replaced as a set to restore OEM tolerances. If only a bushing is worn, replacement kits are often sold together to ensure proper fit; replacing the entire sleeve-and-bushing assembly is the most reliable repair.

Will this kit work with aftermarket shocks or non-RockShox frames?

It may fit other systems that share the same 1/2" diameter and 36.0mm length specification, but differences in bushing ID, sealing and linkage design can affect fit and performance. Always measure eyelet dimensions and consult manufacturer compatibility to avoid improper installation.

Buying Guide

When replacing rear shock mounting hardware, match both diameter and sleeve length to your shock or linkage: the inner bore must accept a 1/2" mounting pin and the sleeve length should equal the specified 36.0mm for this kit. Choose OEM RockShox hardware when possible to preserve factory tolerances and sealing systems. Consider materials and bushing type for your riding conditions—metal sleeves with low-friction polymer bushings strike a good balance between durability and quiet operation. If you’re doing a shock rebuild or swapping dampers, replace mounting hardware at the same time to ensure consistent, trouble-free performance.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product