RockShox Shock Hardware 8X38.0

$15.00

In Stock

OEM RockShox 3-piece rear shock mounting hardware (1/2'' 8X38.0). Hardened steel construction and corrosion-resistant finish for accurate OEM fit and reliable service.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X38.0 is a genuine OEM rear shock mounting kit engineered for precise suspension alignment and lasting durability. This three-piece assembly ships as a ready-to-install mounting solution for shocks that use a 1/2'' pin, labeled by RockShox as 8X38.0 and cross-referenced with SRAM model ID RS-SPP-A0 and manufacturer part 11.4118.091.836. The hardware uses a hardened steel pin and sleeve with a corrosion-resistant finish to withstand repeated servicing and exposure to trail grime. The three-piece design (pin, sleeve, retaining parts) maintains concentric alignment of the shock eyelet and reduces play that can cause premature bushing wear or noise — a simple swap that delivers noticeable real-world improvement in feel and longevity.

Key Features & Benefits

Built to OEM standards: This RockShox kit matches factory tolerances so the shock mounts straight and performs as intended. The hardened steel construction resists bending and deformation under load, while the finish protects against rust and corrosion from wet conditions. Real-world benefits include: • Restores tight, precise suspension articulation to remove slop and knock. • Durable steel construction reduces the need for frequent replacements. • Compact, lightweight spare for trail repairs and shop inventories.

Fit, Dimensions & Compatibility

This kit is specified as a 1/2'' (12.7 mm) mounting pin with an 8X38.0 designation. It is intended for RockShox rear shock mounts and cross-references SRAM RS-SPP-A0 and RockShox part 11.4118.091.836. The package contains the three-piece mounting assembly sized for eyelets that accept a 1/2'' pin and the listed 38.0mm length. Before ordering, confirm your shock and frame eyelet specs: measure pin diameter, eyelet inner width, and total required length. If your setup uses bushings or bearings, check those components for wear and replace them as needed to ensure a proper fit and to prevent premature hardware wear.

Who This Is For

This RockShox Shock Hardware 8X38.0 is ideal for mountain bikers, service technicians, and bike shops who need an exact OEM replacement for rear shock mounting. It's perfect for riders rebuilding a shock, swapping frames, or eliminating play and noise from worn pivot hardware. Keep this as a trail or workshop spare if you frequently swap shocks or ride in conditions that accelerate wear — a small part that preserves the performance and safety of your rear suspension system.

Key Features

✓ Genuine RockShox OEM rear shock mounting hardware kit
✓ Three-piece assembly for precise alignment and reduced play
✓ 1/2'' (12.7 mm) mounting pin with 38.0 mm nominal length
✓ Hardened steel construction for strength and durability
✓ Corrosion-resistant finish suited to wet, muddy conditions
✓ Cross-reference: SRAM RS-SPP-A0, RockShox 11.4118.091.836
✓ Compact, lightweight spare ideal for shops and field repairs

Product Identifiers

Vendor Item #	11.4118.091.836
UPC	710845868320

Frequently Asked Questions

Does this kit include bushings or bearings?

No. The Shock Hardware 8X38.0 is the three-piece mounting assembly (pin, sleeve, retaining parts). Bushings or bearings are sold separately — check your shock and frame eyelets for worn bushings and replace them if needed.

Will this fit my rear shock?

This kit fits shocks and frames that require a 1/2'' (12.7 mm) mounting pin with the specified 38.0 mm length. Confirm your shock's part number or measure pin diameter and eyelet width before ordering to ensure compatibility.

What tools and torque settings do I need to install it?

Installation typically requires basic hand tools (hex keys, socket) and a press or gentle tapping for sleeves if bushings are tight. Always follow the shock and frame manufacturer's torque specifications and service instructions to avoid damage.

Is this an OEM RockShox part?

Yes — this is a genuine RockShox part cross-referenced to SRAM model ID RS-SPP-A0 and RockShox manufacturer number 11.4118.091.836, designed to meet factory tolerances.

Can I use this on non-RockShox shocks or frames?

You can use it on any shock or frame that accepts a 1/2'' pin and the listed length, provided the eyelet specifications match. Verify dimensions and bushing compatibility before installing on non-RockShox components.

How long will this hardware last?

Lifespan depends on riding conditions and maintenance. The hardened steel and corrosion-resistant finish extend service life, but inspect periodically for wear, corrosion, or play and replace when tolerances exceed manufacturer recommendations.

Buying Guide

When buying rear shock mounting hardware, prioritize exact fit: match pin diameter, overall length, and the OEM part number where possible. Hardware that looks similar can differ by fractions of a millimeter — those differences create play, noise, and accelerated wear. Also assess the condition of bushings and bearings during replacement. Installing new hardware on worn bushings will only be a temporary fix. For best results, replace associated bushings or bearings at the same time and follow the shock manufacturer's service intervals and torque recommendations.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product