RockShox Shock Hardware 8X44.0

$15.00

In Stock

RockShox Shock Hardware 8X44.0 is a precision 3-piece rear shock mounting kit (1/2") built for reliable alignment, low friction and long life. OEM spec part #11.4118.091.845 / SRAM RS-SPP-A0.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

RockShox Shock Hardware 8X44.0 is a compact, OEM-grade 3-piece mounting kit engineered for rear shocks that use a 1/2" pin diameter and 8x44.0mm eye-to-eye insertion length. This package contains precision-machined mounting pins and sleeves manufactured to RockShox tolerance standards (SRAM model ID: RS-SPP-A0), ensuring a snug, rattle-free interface between your shock and frame. Materials and finish are optimized for longevity: the pins are made from high-strength steel with a corrosion-resistant plating and the sleeves provide a low-friction bearing surface for smooth articulation. The result is improved suspension performance, reduced wear on shock eyelets, and quieter operation on rough trails.

Key Features & Benefits

Precisely matched geometry: The 8x44.0 sizing and 1/2" diameter follow RockShox OEM specifications for exact fitment, minimizing side-load and keeping the shock aligned under load for consistent damping behaviour. Durable construction: High-strength steel pins and corrosion-resistant finishes resist galling and seizing, while engineered sleeves reduce metal-on-metal contact — protecting both the shock and frame mounts over thousands of cycles for reliable service life.

Fit, Compatibility & Installation Notes

This kit is intended for rear shocks and frames that accept a 1/2" mounting pin and require an 8x44.0 overall hardware length. Manufacturer part number 11.4118.091.845 and SRAM Model ID RS-SPP-A0 match RockShox OEM replacement listings — always cross-check your shock/frame manual or the current spec sheet to confirm dimensions. Shipping dimensions are compact (5.25" x 4" x 0.5") and the kit is very light (0.1 lb), so it’s an easy spare to carry for home service. For installation, press-fit hardware usually requires a drift or arbor press and should be tightened to your shock or frame manufacturer's torque specification; if unsure, consult a qualified mechanic to avoid over‑compression of the sleeve or damage to the eyelet.

Who This Is For

Perfect for mountain bikers and mechanics who want authentic RockShox replacement parts to maintain OEM performance. Whether you’re refreshing a trail hardtail, rebuilding a full‑suspension trail or enduro bike, or stocking a shop bench, this hardware keeps rear suspension operating as intended. Ideal for riders who value quiet, precise suspension articulation and want to prevent premature wear on shock eyelets — a small part that protects expensive components and preserves ride quality.

Key Features

✓ OEM RockShox 3-piece mounting kit for rear shocks
✓ Precision 1/2" diameter pins with 8x44.0mm length
✓ Durable high-strength steel pins with corrosion-resistant finish
✓ Low-friction sleeves reduce metal-on-metal wear and noise
✓ Matches SRAM Model ID RS-SPP-A0 and part #11.4118.091.845
✓ Lightweight, compact package — easy to carry as a spare
✓ Helps maintain proper shock alignment and damping consistency

Product Identifiers

Vendor Item #	11.4118.091.845
UPC	710845868412

Frequently Asked Questions

Will this fit my shock?

Check your shock and frame mounting dimensions: this kit requires a 1/2" pin diameter and an 8x44.0mm hardware length. Confirm part #11.4118.091.845 or SRAM Model ID RS-SPP-A0 against your shock or service manual to ensure compatibility.

What tools do I need to install this hardware?

Press-fit mounting hardware is typically installed with an arbor press or a suitable drift tool and soft-faced hammer. Accurate alignment and even pressure are important — if you’re unsure, have a professional mechanic press the pins to avoid damaging bushings or eyelets.

How often should I replace shock mounting hardware?

Replacement interval depends on riding conditions and mileage. Inspect hardware whenever you service your shock or if you notice play, grinding, or noise. Replace sleeves or pins if they show scoring, corrosion, or excessive wear to protect the shock and frame.

Is this a complete kit or do I need extra parts?

This is a 3-piece OEM-style kit intended as complete mounting hardware for compatible RockShox rear shocks. Some installations may also use seals or washers supplied with the shock — verify your installation guide to confirm you have all necessary components.

Can I substitute a different size?

No — using incorrect pin diameter or length alters suspension geometry and can damage your shock or frame. Always use the exact size listed by your shock and frame manufacturer: 1/2" diameter, 8x44.0mm length for this kit.

Buying Guide

When buying rear shock mounting hardware, measure both the pin diameter and the installed length precisely. The most common mistakes are mix-ups between 1/2" and 8mm pins or choosing the wrong length, which affects shock articulation and can damage eyelets. Buy OEM-matched kits when possible to maintain original geometry and tolerances. Consider materials and finish: plated high-strength steel pins and low-friction sleeves offer the best balance of longevity and quiet operation. Keep a spare kit in your toolbox — replacing worn hardware early is far cheaper than repairing a damaged shock or frame.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product