RockShox SIDluxe Remote In Eyelet Assy

$140.00

In Stock

OEM RockShox SIDluxe (A1) remote‑in rear shock eyelet assembly — anodized eyelet, air valve, controls and shaft O‑rings for a direct replacement. Restores remote function and seals for lightweight XC-focused shocks.

Add to Cart

🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

Restore OEM performance with the RockShox SIDluxe Remote In Eyelet Assembly (Part 11.4118.070.010). This kit includes an anodized aluminum eyelet, air valve and cap, remote controls, and all shaft O‑rings — everything needed to replace a worn or damaged remote‑in eyelet on SIDluxe (A1) rear shocks. Engineered for lightweight XC and trail use, the anodized aluminum construction balances corrosion resistance with low weight (0.3 lb shipping weight). The kit is manufactured to RockShox tolerances so seals and control interfaces align precisely with the SIDluxe valve body for consistent air seal and reliable remote lockout actuation.

Key Features & Benefits

Complete eyelet solution: anodized eyelet, air valve + cap, remote controls and shaft O‑rings supplied so you avoid parts chasing during a repair. Replacing the entire assembly ensures correct alignment and long‑term reliability. • Anodized 6061‑T6 aluminum eyelet for strength, light weight and corrosion protection. • Pre‑matched O‑rings and valve parts maintain factory air seal and remote responsiveness. • SRAM Model ID RS‑SPP‑A0 compatible — direct OEM replacement for SIDluxe (A1) remote‑in standard.

Fit, Compatibility & Installation Notes

This eyelet assembly is designed specifically for RockShox SIDluxe (A1) rear shocks with remote‑in configuration. Confirm your shock's model ID or serial and the OEM part number (11.4118.070.010 / RS‑SPP‑A0) before ordering to ensure direct fit. It is not a universal eyelet and will not fit remote‑out variants or non‑SIDluxe shock families without modification. Installation requires standard suspension service tools and basic mechanical skill: remove the shock from the frame, disassemble the upper/lower eyelet area, swap in the new assembly, and reassemble with correct torque and lubricant. If you're unsure, have a qualified shock tech or authorized RockShox service center perform the swap to protect seals and adjust preload/tuning.

Who It's For

This replacement eyelet assembly is ideal for XC racers, lightweight trail riders and home mechanics who need an OEM‑spec repair part to restore a SIDluxe shock's remote function. It's also a must for bike shops servicing RockShox SIDluxe shocks where fast, reliable replacements keep turnaround times low. If your remote lockout is unresponsive, the eyelet is damaged, or the air valve area is leaking or corroded, replacing this assembly returns your shock to factory interface and helps avoid repeated service intervals from partial repairs.

Key Features

✓ Direct OEM replacement for RockShox SIDluxe (A1) remote‑in shocks
✓ Includes anodized aluminum eyelet, air valve, cap and controls
✓ Supplied shaft O‑rings matched to factory sealing surfaces
✓ SRAM Model ID RS‑SPP‑A0 / Part 11.4118.070.010 compatibility
✓ Lightweight construction — minimal added mass for XC riders
✓ Restores remote lockout function and factory air seal
✓ Precision machined for correct alignment and long service life

Product Identifiers

Vendor Item #	11.4118.070.010
UPC	710845869082

Frequently Asked Questions

Will this eyelet assembly fit every RockShox shock?

No. This assembly is specifically for RockShox SIDluxe (A1) rear shocks with the remote‑in configuration. Check your shock's model ID, serial, or OEM part number (11.4118.070.010 / RS‑SPP‑A0) before purchasing to confirm compatibility.

Does the kit include seals and O‑rings required for installation?

Yes. The SIDluxe Remote In Eyelet Assembly ships with the shaft O‑rings and sealing components required for the eyelet area. Additional internal damper seals or air can service parts are not included and may be required for a full shock service.

Can I install this part at home or should I use a shop?

A competent home mechanic with suspension experience can install it, but proper tools and torque specs are important. If you lack the tools or are uncertain about damper reassembly and air system integrity, it's safer to have a qualified shock tech or RockShox service center perform the installation.

Does the assembly include the remote lever and cable?

The kit includes the remote controls that interface at the eyelet, but it does not include frame‑mounted routing hardware, full remote levers or shift cables/housings. Verify what your specific remote system requires before ordering.

How will I know when to replace the eyelet assembly?

Replace the assembly if you see oil or air leaks around the eyelet, corrosion or physical damage to the eyelet, or loss of remote lockout function. Replacing the full assembly is preferred to patch repairs to ensure correct alignment and sealing.

Buying Guide

When buying a rear shock eyelet assembly, first confirm your shock model, configuration (remote‑in vs remote‑out) and OEM part number. The SIDluxe Remote In Eyelet Assembly is tailored for SIDluxe A1 remote‑in shocks — use the part number 11.4118.070.010 or SRAM ID RS‑SPP‑A0 to cross‑reference. If you're servicing the shock yourself, budget for a full service kit if the damper has high hours or contamination. For guaranteed fit and longevity, prefer OEM assemblies like this one to aftermarket generic replacements.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product