SRAM X01 DH Screw Kit
SRAM

SRAM X01 DH Screw Kit

$15.00
In Stock

OEM SRAM replacement kit for X01/X01DH rear derailleurs including B-screw and limit screw. Precision-machined, corrosion-resistant hardware for reliable derailleur setup and service.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview & Technology

SRAM X01 DH Screw Kit (Model ID: RD-SPP-A0, MPN 11.7518.034.000) is an OEM replacement kit containing the rear derailleur B-screw and limit screw specifically engineered for X01 and X01DH rear derailleurs. These small parts are precision-machined to SRAM's tolerances to restore factory shifting geometry after crashes, service, or part loss. The screws are manufactured from hardened steel and finished with a corrosion-resistant coating to stand up to wet, muddy, and salty conditions typical of gravity and enduro riding. Using OEM fasteners ensures thread engagement, head profile, and seating angles match SRAM's spec — which keeps your derailleur functioning predictably under load.

Key Features & Benefits

OEM fit and finish: Exact replacement for SRAM X01 and X01DH rear derailleurs so you maintain factory shift performance and safety. Installing original hardware avoids misalignment or unusual wear that can come from generic fasteners. Durable construction: Hardened steel screws with a corrosion-resistant surface finish ensure long life in the harsh environments downhill riders face. The kit is compact and lightweight (shipping weight ~0.02 lb) so it’s easy to carry as a spare without adding noticeable bulk.

Fit, Compatibility & Installation

This screw kit is specifically designed for SRAM X01 and X01DH rear derailleurs (SRAM Model ID RD-SPP-A0). It replaces the B-screw (which sets pulley-to-cassette spacing) and the high/low limit screw used to set derailleur travel limits. Confirm part number 11.7518.034.000 against your derailleur serial or service manual for 100% compatibility. Installation requires basic tools (small hex/allen key and a screwdriver depending on head type). Tighten until snug and make final adjustments with your derailleur tuning procedure — avoid over-tightening to prevent stripped threads. If you’re unsure, consult SRAM’s tech docs or a qualified mechanic.

Who This Is For

This kit is aimed at gravity and enduro riders who need authentic replacement hardware after a crash, during regular service, or when prepping a bike for travel. If you run SRAM X01 or X01DH and value OEM fit, correct geometry and durable components, this is the exact small-parts kit you want on hand. It’s also useful for mechanics and shops stocking common SRAM derailleur service parts — small, inexpensive, but critical for restoring reliable shifting on high-demand downhill builds.

Key Features

  • ✓ OEM SRAM replacement kit for X01 and X01DH rear derailleurs
  • ✓ Precision-machined hardened steel screws with corrosion-resistant finish
  • ✓ Includes B-screw and limit screw to restore factory derailleur geometry
  • ✓ Lightweight, compact kit — easy to carry as a spare on rides
  • ✓ Exact thread profile and head fit for reliable installation and tuning
  • ✓ Ideal for crash replacement, routine service, and shop inventory

Product Identifiers

Vendor Item # 11.7518.034.000
UPC 710845749650

Frequently Asked Questions

What parts are included in the X01 DH Screw Kit?

The kit provides the OEM B-screw and derailleur limit screw intended for SRAM X01/X01DH rear derailleurs. It’s sold as a small hardware replacement package — check your service manual to verify if additional washers or retainers are required for your specific derailleur version.

Is this kit compatible with non-DH X01 derailleurs?

Yes — this kit is specified for X01 and X01DH models. While it’s designed around SRAM’s X01 family, always confirm the part number (11.7518.034.000) against your derailleur’s documentation to ensure compatibility before purchase.

What tools do I need to install these screws?

Installation typically requires a small hex (allen) key or screwdriver matching the screw heads. You’ll also need your standard derailleur adjustment tools. Tighten the screws until seated and perform fine adjustments using standard derailleur setup procedures — avoid excessive torque to prevent thread damage.

Can I use generic screws instead of this OEM kit?

While generic screws may physically fit, OEM hardware ensures the correct head profile, thread pitch and seating geometry SRAM designed for reliable shifting and safety. Using non-OEM fasteners risks misalignment or premature wear — for critical components, OEM replacements are recommended.

How durable are these replacement screws in harsh conditions?

The screws are made from hardened steel with a corrosion-resistant finish to handle wet, muddy, and salty conditions common in gravity and enduro riding. Regular inspection and cleaning as part of your maintenance routine will maximize service life.

What are the shipping dimensions and weight?

The kit ships in compact packaging measuring approximately 4.3" x 2.5" x 0.3" with a weight around 0.02 lb, making it easy to store in a toolbox or carry in a saddle/pack as a spare.

Buying Guide

When buying derailleur hardware, always confirm OEM part numbers and model compatibility. Small fasteners like the B-screw and limit screw determine pulley-to-cassette spacing and derailleur travel limits — both vital to smooth, reliable shifting. Choosing the OEM SRAM X01 DH Screw Kit ensures correct thread pitch, head fit, and seating geometry. Stock one kit per bike in your workshop or add a spare to your ride pack if you often push hard on technical descents. For installation, use the correct-size hex key or screwdriver, clean mating threads, and follow SRAM’s derailleur setup procedure to dial in precise shifting.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product