Wheels Manufacturing BB86-->30mm SS
Wheels Manufacturing

Wheels Manufacturing BB86-->30mm SS

In Stock

Convert BB86/BB92 press-fit shells to accept 30mm spindle cranksets with stainless dual-row flanged bearings. Sold individually — two bearings required per frame.

Add to Cart
🚚 Fast Shipping 🔒 Secure Checkout ↩ Easy Returns

Product Details

Overview — Precision BB86 to 30mm Press-Fit Adapter

Wheels Manufacturing BB86→30mm SS (Part #BB86-30MM, SKU 380331) gives you a simple, reliable way to run 30mm spindle cranksets in modern 86mm press-fit shells. These are sold individually, so you'll need two bearings per frame to complete your conversion. Each unit is a flanged, dual‑row cartridge bearing designed for press-fit installation into a 41mm ID smooth bore bottom bracket shell. Built for riders who want to fit 30mm spindle cranks such as FSA BB386EVO, Rotor 3D+, RaceFace Next SL and e.thirteen into road and gravel frames, these stainless bearings deliver low friction, long life and stable spindle support. Note: cranks must have spindles longer than 104mm to be compatible with this bearing solution.

Technology & Materials — Dual‑Row Stainless Bearings

These are heavy-duty dual-row cartridge bearings with flanges to control axial position inside the shell. The bearings use stainless steel races and balls with robust seals to keep grit and moisture out — ideal for road and mixed-surface use where longevity and low rolling resistance matter. Dual rows increase contact area for better load distribution and reduced edge loading compared to single‑row bearings. Each bearing is machined to a 41mm outer diameter to press directly into smooth-bore BB86/BB92/BB91/BB71-41/BB107 frames. The 30mm internal bore accepts modern 30mm spindles and maintains accurate chainline and crank stiffness without the bulk of external cups.

Fit & Compatibility — What You Need to Know

These bearings are intended for press-fit shells with a 41mm ID smooth bore and an 86mm shell width (BB86). They will also fit related 41mm-sleeved press-fit standards like BB92, BB91, BB71-41 and BB107 where the shell ID is 41mm. Because they are sold individually, plan to purchase two units per frame (one per side). Compatibility checklist: • Spindle diameter: 30mm • Minimum spindle length: >104mm • Shell inner diameter: 41mm smooth bore • Shell width: 86mm (BB86) — confirm frame spec Proper installation requires a press-fit tool or arbor press and a bearing driver sized for 41mm OD bearings; avoid hammering directly on the bearing to prevent seal damage.

Who This Is For — Upgraders, Shops, and Multidiscipline Riders

If you’re upgrading an alloy or carbon road/gravel frame to run a 30mm spindle crankset, this bearing is a lightweight, serviceable solution. Cyclists who want the stiffness and durability of 30mm spindles without replacing the frame or using bulky external cups will appreciate the clean fit and low profile of the Wheels Manufacturing BB86→30mm SS. Bike shops and mechanics will like the repeatable tolerances and stainless construction for workshop installs and rebuilds. Note that riders using very short crank spindles (≤104mm) should look for alternative solutions or confirm crank compatibility before purchase.

Key Features

  • ✓ Press-fit dual-row flanged stainless bearing for BB86/41mm shells
  • ✓ Accepts 30mm spindles (FSA, Rotor, RaceFace, e.thirteen compatible)
  • ✓ Sold individually — two bearings required to complete a frame swap
  • ✓ 41mm outer diameter fits smooth-bore BB86/BB92/BB91/BB107 shells
  • ✓ Stainless races and sealed construction resist corrosion and contamination
  • ✓ Improved load distribution and crank stiffness vs single-row bearings
  • ✓ Requires 30mm spindle cranksets with spindle lengths over 104mm

Specifications

BB Shell Type BB86
BB Shell Width 86mm
BB Bearing Stainless
Crank Spindle Diameter 30mm
Cup Diameter 41mm

Product Identifiers

Vendor Item # BB86-30MM
UPC 811079021830

Frequently Asked Questions

Do I need to buy one or two bearings?

These bearings are sold individually. You must purchase two (one left, one right) to fully outfit a BB86/BB92 frame.

Will these fit my BB86 frame?

They fit frames with a 41mm ID smooth bore and an 86mm shell width. Check your frame spec: if your bottom bracket shell is a 41mm smooth bore (common on BB86/BB92/BB107 variants), these will press in directly.

Which cranksets are compatible?

This bearing accepts 30mm spindles — compatible with cranks like FSA BB386EVO, Rotor 3D+, RaceFace Next SL and many e.thirteen models. Ensure the crank spindle length is longer than 104mm for correct interface and chainline.

What tools are required for installation?

Press-fit installation requires a bearing press or arbor press and a 41mm bearing driver to evenly seat the bearing. Do not hammer directly on the bearing. A BB facing tool and grease are recommended to ensure alignment and prevent creaks.

How long will these bearings last?

Lifespan depends on conditions and maintenance. Stainless construction and seals improve longevity, but frequent wet/muddy riding will shorten service life. Expect years of service under normal road/gravel use; replace when play or roughness appears.

Can I use them with external cup adapters?

No — these are designed to press directly into a 41mm ID shell. If you prefer external cups, choose a compatible external-cup bottom bracket system instead.

Buying Guide

When choosing a press-fit to 30mm bearing, always start by measuring your frame’s bottom bracket shell ID and width. These Wheels Manufacturing bearings require a 41mm ID smooth bore and an 86mm shell width (BB86). Confirm the crank spindle diameter (30mm) and minimum spindle length (>104mm) to ensure correct fit and chainline. Consider bearing material and seal construction: stainless bearings with good seals perform best in variable conditions, while dual-row designs spread load and reduce edge stress — important if you ride hard or carry loads. Also plan to buy two bearings per frame and the correct press-fit tools for a clean, quiet installation.

Ready to order?

Shop with confidence at Scenders — premium cycling parts, fast shipping.

View Full Product